Anyone has any example or instruction on how to add a X100P card with Elastix. I have the same machine installed trixbox and detection of the card was smooth. I had to do nothing with the zapata.conf All I did was change the g0 to 1 and the zap trunk showed up in FOP and I was able to receive calls. And in Elastix, I tried to do the same - nothing happend so then I have copied the same zapata.conf file in Elastix and from CLI stopped asterisk then restarted Zaptel by: /etc/init.d/zaptel restart then asterisk Start But nothing happens. The hardware detection shows the card as: PCI Slot # 1: WCFXO/0 "Wildcard X101P Board 1" Port # 1 FXO What am I missing?