ZAP to Zap tranferd call not hangup automaticaly

Discussion in 'General' started by samix4u, Dec 3, 2008.

  1. samix4u

    Joined:
    Mar 31, 2008
    Messages:
    20
    Likes Received:
    0
    I have some strange problem. i have sangoma 8port analog card which is connected to my analog PABX through 8 extensions my elastix version is Elastix 1.3-2 . im running small call center with 5 members by using only call Queue and ring groups.
    when i transfer the call from one Zap channel to another from my sip phone when they over there call it wont hangup automatically it continue utilize the zap hours unnecessarily. so i have to manually disconnect those lines through FOP. Now this become very searios broblem to me so can you please help me to sort out this problem.

    my zapata.conf as below.

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=4.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    usecallingpres=yes
    callreturn=yes
    busydetect=yes
    busycount=7
    hanguponpolarityswitch=yes


    immediate=no

    #include zapata_additional.conf
    #include zapata-channels.conf
     

Share This Page