Why Status: UNREACHABLE

bwg

Joined
Aug 14, 2008
Messages
62
Likes
0
Points
0
#1
Hi
My home number is 103 and office number is 100.
Home use Linksys PAP2T office X-LITE
Today called from 100 >> 103 not connect but from 103>>100 (or other number) make call.
Why Status: UNREACHABLE
CLI> sip show peer 103
CLI>

* Name : 103
Secret : <Set>
MD5Secret : <Not set>
Context : from-internal
Subscr.Cont. : <Not set>
Language :
AMA flags : Unknown
Transfer mode: open
CallingPres : Presentation Allowed, Not Screened
Callgroup :
Pickupgroup :
Mailbox : 103@device
VM Extension : *97
LastMsgsSent : 0/0
Call limit : 50
Dynamic : Yes
Callerid : "device" <103>
MaxCallBR : 384 kbps
Expire : 3479
Insecure : no
Nat : Always
ACL : No
T38 pt UDPTL : No
CanReinvite : No
PromiscRedir : No
User=Phone : No
Video Support: No
Trust RPID : No
Send RPID : No
Subscriptions: Yes
Overlap dial : Yes
DTMFmode : rfc2833
LastMsg : 0
ToHost :
Addr->IP : 88.44.33.44 Port 5061
Defaddr->IP : 0.0.0.0 Port 5060
Def. Username: 103
SIP Options : (none)
Codecs : 0xc (ulaw|alaw)
Codec Order : (ulaw:20,alaw:20)
Auto-Framing: No
Status : UNREACHABLE
Useragent :
Reg. Contact : sip:103@192.168.1.100:5061
 

danardf

Joined
Dec 3, 2007
Messages
8,069
Likes
10
Points
88
#2
Hi.
I don't see:
  • qualify=yes.
    nat=yes.

Can you ping all?

Don't use the same port udp SIP for your 2 lines, they must be different!!
exemple: 5060 and 5061, or 5061 and 5062!
 

bwg

Joined
Aug 14, 2008
Messages
62
Likes
0
Points
0
#3
No
2 lines is another lokalization. Not use another divice this port (5060-5061-5062)
But I now checked status is OK (35 ms) Now it posible make a call.

Why make sometimes this problem
 

danardf

Joined
Dec 3, 2007
Messages
8,069
Likes
10
Points
88
#4
Ok.. if now it's good...it's the principal ;)
 

bwg

Joined
Aug 14, 2008
Messages
62
Likes
0
Points
0
#5
Yes
Thanks;)
 

Members online

Latest posts

Forum statistics

Threads
30,970
Messages
131,034
Members
17,681
Latest member
v1c704
Top