Video Conf Probs

Discussion in 'General' started by Amphibian, Jun 27, 2010.

  1. Amphibian

    Joined:
    Sep 8, 2009
    Messages:
    1,128
    Likes Received:
    2
    Have installed Ekiga on two different machines. Cameras on both have video but not passing video thru.

    When I run "sip show channels" I get the following:

    Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message
    192.168.1.102 8000 3e39692319b 00102/00000 0x1c0004 (ulaw| No Tx: ACK
    192.168.1.12 5000 ODUxMzE2OGZ 00101/00004 0x4 (ulaw) No Rx: ACK
    192.168.1.12 5000 20a6a385217 00102/00000 0x0 (nothing) No Init: INVITE
    3 active SIP channels


    It appears that I have two simultaneous calls on extension 5000 going at the same time.

    When you run a video conference doe it actually have two sip channels open or do I have a problem with ext. 5000 running two separate calls at the same time?

    Thanks
    Amphibian
     

Share This Page