Very strong echo

Discussion in 'General' started by wallcrawler, Oct 20, 2010.

  1. wallcrawler

    Joined:
    Oct 1, 2009
    Messages:
    10
    Likes Received:
    0
    I have installed in my company Elastix 1.5.2-2. All operators are using phones and the extensions are SIP, with the iLBC codec as primary. Well, many users are hearing a very strong echo, disturbing the conversation. Is there any configuration or update that may resolve this issue?
     
  2. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    Hi.

    One solution, use the QoS into your LAN and try to set the jitterbuffer=yes and the other parameters arround.
    The QoS is some paramters in your routeur or maiby your switch.
    and try to put some QoS / Tos parameters in config's Elastix (sip config for example).

    Be careful at RX and TX gain on each phone extension. Too high, you could have an echo.
     

Share This Page