unable to make outbound calls using digium card

Discussion in 'General' started by Oosthuizen, Nov 27, 2010.

  1. Oosthuizen

    Joined:
    Jun 22, 2010
    Messages:
    59
    Likes Received:
    0
    Hi There

    i really have a problem here, i am unable to make outbound call using my PSTN lines
    i am using a Digium card
    my CLI looks like this when attempting an outbound call
    == Using SIP RTP TOS bits 184
    == Using SIP RTP CoS mark 5
    > doing dnsmgr_lookup for 'vphone.co.za'
    > ast_get_srv: SRV lookup for '_sip._UDP.vphone.co.za' mapped to host sip2.vphone.co.za, port 5060
    > doing dnsmgr_lookup for 'vphone.co.za'
    > ast_get_srv: SRV lookup for '_sip._UDP.vphone.co.za' mapped to host sip2.vphone.co.za, port 5060
    == Using SIP RTP TOS bits 184
    == Using SIP RTP CoS mark 5
    -- Executing [0720467707@from-internal:1] ResetCDR("SIP/2000-00000002", "") in new stack
    -- Executing [0720467707@from-internal:2] NoCDR("SIP/2000-00000002", "") in new stack
    -- Executing [0720467707@from-internal:3] Progress("SIP/2000-00000002", "") in new stack
    -- Executing [0720467707@from-internal:4] Wait("SIP/2000-00000002", "1") in new stack
    -- Executing [0720467707@from-internal:5] Playback("SIP/2000-00000002", "silence/1&cannot-complete-as-dialed&check-number-dial-again,noanswer") in new stack
    -- <SIP/2000-00000002> Playing 'silence/1.gsm' (language 'en')
    -- <SIP/2000-00000002> Playing 'cannot-complete-as-dialed.gsm' (language 'en')
    -- <SIP/2000-00000002> Playing 'check-number-dial-again.gsm' (language 'en')
    == Spawn extension (from-internal, 0720467707, 5) exited non-zero on 'SIP/2000-00000002'
    -- Executing [h@from-internal:1] Macro("SIP/2000-00000002", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/2000-00000002", "1?noautomon") in new stack
    -- Goto (macro-hangupcall,s,3)
    -- Executing [s@macro-hangupcall:3] NoOp("SIP/2000-00000002", "TOUCH_MONITOR_OUTPUT=") in new stack
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/2000-00000002", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/2000-00000002", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,10)
    -- Executing [s@macro-hangupcall:10] GotoIf("SIP/2000-00000002", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,12)
    -- Executing [s@macro-hangupcall:12] Hangup("SIP/2000-00000002", "") in new stack
    == Spawn extension (macro-hangupcall, s, 12) exited non-zero on 'SIP/2000-00000002' in macro 'hangupcall'
    == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/2000-00000002'

    My trunk detail as follows

    Trunk Description: Zap Channel G0
    Outbound Caller ID: 031xxxxxxx
    Maximum Channels: 1
    Dial Rules: "left Blank"
    Zap Identifier: G0

    Outbound Rout details as follows

    Route Name: Telkom
    Rout CID: 031xxxxxxx
    Dial Pattern: .
    Trunk Sequence: zap/go

    Dahdi-Channels.conf File

    ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
    ;;; line="5 WCTDM/0/4 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 5
    callerid=
    group=
    context=default

    ;;; line="6 WCTDM/0/5 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 6
    callerid=
    group=
    context=default

    ;;; line="7 WCTDM/0/6 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 7
    callerid=
    group=
    context=default

    ;;; line="8 WCTDM/0/7 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 8
    callerid=
    group=
    context=default

    please if any one can help

    Thank you

    Kobus
     

Share This Page