Trying to use my elastix box as a T1 passthrough

Discussion in 'General' started by emash, Feb 4, 2011.

  1. emash

    Joined:
    Jul 12, 2010
    Messages:
    8
    Likes Received:
    0
    Trying to setup the following

    PBX to Elastix to CO via T1 ties

    I'm using a 2 span digium card. Card is confiured correctly to pass traffic to the CO from the elastix box and also to call extensions on the old PBX. The old pbx can also call extensions on the elastix box.

    What does not work is calls from the old pbx to the CO through the elastix box. I see the calls comming in and elastix is seeing the call to the CO from the old PBX as an inbound call and is trying to route the call by the number being called thinking it is a DID.

    Looking for any advice on how to rectify this.

    Thanks

    Erik
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
  3. emash

    Joined:
    Jul 12, 2010
    Messages:
    8
    Likes Received:
    0
    Well that fixed it. Thank you. I'm still new, but making progress. :)

    Erik
     

Share This Page