Trocal sip en 1.3 NO FUNCIONA, Rafael help me

leito

Joined
Jun 19, 2008
Messages
63
Likes
0
Points
0
#1
Tengo la 1.1 funcionando y estoy probando en instalar la 1.3 pero el troncal sip se registra, recibe llamadas pero en las saliente inmediatamente despues de marcar el nro "All Circuits are busy now"
Vi a vaeios con estos problemas aca en el foro pero no vi solucion al respecto, Si alguien sabe agradecere eternamente su ayuda, gracias...

Peer Details:
allow=g729&ulaw
auth=user
callerid=user
canreinvite=no
disallow=all
fromuser=1000
host=ip de mi proveedor
insecure=port,invite
maxexpirey=60
nat=yes
outboundproxy=ip de mi proveedor
qualify=yes
regseconds=60
secret=pass
type=peer
username=user




-- Executing [52364190@from-internal:1] Macro("SIP/7001-08560560", "user-cal lerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/7001-08560560", "user-calle rid: device 7001") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/7001-08560560", "AMPUSER=700 1") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/7001-08560560", "0?report ") in new stack
-- Executing [s@macro-user-callerid:4] ExecIf("SIP/7001-08560560", "1|Set|RE ALCALLERIDNUM=7001") in new stack
-- Executing [s@macro-user-callerid:5] NoOp("SIP/7001-08560560", "REALCALLER IDNUM is 7001") in new stack
-- Executing [s@macro-user-callerid:6] Set("SIP/7001-08560560", "AMPUSER=700 1") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/7001-08560560", "AMPUSERCIDN AME=7001") in new stack
-- Executing [s@macro-user-callerid:8] GotoIf("SIP/7001-08560560", "0?report ") in new stack
-- Executing [s@macro-user-callerid:9] Set("SIP/7001-08560560", "AMPUSERCID= 7001") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/7001-08560560", "CALLERID(a ll)="7001" <7001>") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/7001-08560560", "REALCALLER IDNUM=7001") in new stack
-- Executing [s@macro-user-callerid:12] ExecIf("SIP/7001-08560560", "0|Set|C HANNEL(language)=") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/7001-08560560", "TTL: ARG 1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/7001-08560560", "1?conti nue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/7001-08560560", "Using Cal lerID "7001" <7001>") in new stack
-- Executing [52364190@from-internal:2] Set("SIP/7001-08560560", "_NODEST=") in new stack
-- Executing [52364190@from-internal:3] Macro("SIP/7001-08560560", "record-e nable|7001|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/7001-08560560", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/7001-08560560", "recordingch eck|20081215-232904|1229390944.23") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20081215-232904|1229390944.23: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("SIP/7001-08560560", "No recordi ng needed") in new stack
-- Executing [52364190@from-internal:4] Macro("SIP/7001-08560560", "dialout- trunk|2|52364190||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/7001-08560560", "DIAL_TRUNK= 2") in new stack
-- Executing [s@macro-dialout-trunk:2] ExecIf("SIP/7001-08560560", "0|Authen ticate|") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/7001-08560560", "0?disabl etrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/7001-08560560", "DIAL_NUMBER =52364190") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/7001-08560560", "DIAL_TRUNK_ OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/7001-08560560", "GROUP()=OUT _2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/7001-08560560", "1?nomax" ) in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/7001-08560560", "0?skipou tcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/7001-08560560", "DIAL_TRUNK _OPTIONS=t") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/7001-08560560", "outbound -callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/7001-08560560", "0|Se tCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] GotoIf("SIP/7001-08560560", "1?st art") in new stack
-- Goto (macro-outbound-callerid,s,4)
-- Executing [s@macro-outbound-callerid:4] NoOp("SIP/7001-08560560", "REALCA LLERIDNUM is 7001") in new stack
-- Executing [s@macro-outbound-callerid:5] GotoIf("SIP/7001-08560560", "1?no rmcid") in new stack
-- Goto (macro-outbound-callerid,s,10)
-- Executing [s@macro-outbound-callerid:10] Set("SIP/7001-08560560", "USEROU TCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("SIP/7001-08560560", "EMERGE NCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] Set("SIP/7001-08560560", "TRUNKO UTCID=") in new stack
-- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/7001-08560560", "1?t runkcid") in new stack
-- Goto (macro-outbound-callerid,s,17)
-- Executing [s@macro-outbound-callerid:17] GotoIf("SIP/7001-08560560", "1?u sercid") in new stack
-- Goto (macro-outbound-callerid,s,19)
-- Executing [s@macro-outbound-callerid:19] GotoIf("SIP/7001-08560560", "1?r eport") in new stack
-- Goto (macro-outbound-callerid,s,23)
-- Executing [s@macro-outbound-callerid:23] NoOp("SIP/7001-08560560", "Calle rID set to "7001" <7001>") in new stack
-- Executing [s@macro-dialout-trunk:12] AGI("SIP/7001-08560560", "fixlocalpr efix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:13] Set("SIP/7001-08560560", "OUTNUM=523 64190") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/7001-08560560", "custom=SIP /Out") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("SIP/7001-08560560", "1?gocal l") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Macro("SIP/7001-08560560", "dialout- trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/7001-08560560", "0?bypas s|1") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("SIP/7001-08560560", "0?custo mtrunk") in new stack
-- Executing [s@macro-dialout-trunk:20] Dial("SIP/7001-08560560", "SIP/Out/5 2364190|300|t") in new stack
-- Couldn't call Out/52364190
== Everyone is busy/congested at this time (0:0/0/0)
-- Executing [s@macro-dialout-trunk:21] Goto("SIP/7001-08560560", "s-CHANUNA VAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/7001-08560560 ", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/7001-08560560", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in ne w stack
-- Executing [52364190@from-internal:5] Macro("SIP/7001-08560560", "outisbus y|") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/7001-08560560", "all-circui ts-busy-now|noanswer") in new stack
-- Executing [s@macro-outisbusy:2] Playback("SIP/7001-08560560", "pls-try-ca ll-later|noanswer") in new stack
-- Executing [s@macro-outisbusy:3] Macro("SIP/7001-08560560", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/7001-08560560", "w") in ne w stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/7001-08560560", "") in new st ack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/7001-08560560", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/7001-08560560", "1?skipblkvm ") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/7001-08560560", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/7001-08560560", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/7001-0856 0560' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/7001-0856 0560' in macro 'outisbusy'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/7001-0856 0560'
elastix*CLI>
 

pcastanedardz

Joined
Aug 13, 2008
Messages
29
Likes
0
Points
0
#2
Re:Trocal sip en 1.3 NO FUNCIONA

Buenas tardes a todos , tengo el mismo problema con esa versión de echo me tuve que quedar en la versión anterior, si saben la solución por favor coméntenla, de antemano mil gracias por su tiempo.
 

leito

Joined
Jun 19, 2008
Messages
63
Likes
0
Points
0
#3
A nadie le paso que el trocal sip no le funcione? solo a mi y a pcastanedardz? no obtengo respuesta de nadie... por favor al menos contesten que les funciono sin problemas o algo, admin o alguien que le de pelota a este tema....
Gracias
 

ElasMex

Joined
Oct 22, 2007
Messages
493
Likes
0
Points
16
#4

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,565
Latest member
omarmenichetti
Top