Test Conference - some points don't works.

danardf

Joined
Dec 3, 2007
Messages
8,069
Likes
10
Points
88
#1
I read the doc Elastix Without Tear and I did make a conference step by step , like on the document.

I create a conf by freepbx. 8000 - name General like on the doc.
I leave blank the code pin.

Into Elastix - conf manager, I create a conf with code some parameters and I add the code pin (user and admin).

If I call the 8000, the voice don't ask me (enter the Pin code..Etc), but only my name.

By Elastix conf manager, some parameters aren't include into the config!?

Now, same problem with invite conference.

Now question: The doc is right or bad?

Another problem, If i call 8000, the language is in FR, but by invite conference, the language is EN!

Next: If the conference call by (5555 -> conferences,5555,1) all works fine.

Thanks
 

kspare

Joined
Mar 23, 2009
Messages
73
Likes
0
Points
0
#2
If you have 5555 working, you don't need to create the conference. The module will do it for you.

To make this work the way you have it configured, you would call 5555, then enter 8000 as your conference.

But if you created a conference in the module, you can call it via 5555 and entering the conference module.

However I will warn you there is a bug in there. You can't manage a conference that has started because the code will think it is a past conference, you have to click on it in advance.

I'm working on fixing the code so current conferences will show conferences that have not ended yet.

Hope that helps!
 

danardf

Joined
Dec 3, 2007
Messages
8,069
Likes
10
Points
88
#3
Ok ...I see now.
Thanks for your help and these informations. ;)
 

midiabyte

Joined
Aug 31, 2009
Messages
58
Likes
0
Points
0
#4
Hello, are failing to create any conference. is directly calling the conference number (eg 8001) or by calling 5555.

Sense that to create a conference, the file meetme_additional.conf, is not being filled properly. Instead of appearing conf => 8001,1234,1235

Appears only conf => 8001,1234

However, even if it is edited by hand, inserting the code administrator (1235), the conferences do not work.

If called directly at (8001), states that this conference room is not available. If called via 5555, simply says nothing, and drops the call.

Code:
    -- Executing [5555@from-internal:1] Answer("SIP/9205-0a12a090", "") in new stack
    -- Executing [5555@from-internal:2] Wait("SIP/9205-0a12a090", "3") in new stack
  == Spawn extension (from-internal, 5555, 3) exited non-zero on 'SIP/9205-0a12a090'
    -- Executing [h@from-internal:1] Macro("SIP/9205-0a12a090", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/9205-0a12a090", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/9205-0a12a090", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/9205-0a12a090", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("SIP/9205-0a12a090", "") in new stack
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/9205-0a12a090' in macro 'hangupcall'
  == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/9205-0a12a090'
Code:
-- Executing [8001@from-internal:1] Macro("SIP/9205-0a1375c8", "user-callerid|") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/9205-0a1375c8", "AMPUSER=9205") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/9205-0a1375c8", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/9205-0a1375c8", "1|Set|REALCALLERIDNUM=9205") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/9205-0a1375c8", "AMPUSER=9205") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/9205-0a1375c8", "AMPUSERCIDNAME=Autograf PE") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/9205-0a1375c8", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/9205-0a1375c8", "AMPUSERCID=9205") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/9205-0a1375c8", "CALLERID(all)="Autograf PE" <9205>") in new stack
    -- Executing [s@macro-user-callerid:9] ExecIf("SIP/9205-0a1375c8", "1|Set|CHANNEL(language)=pt_BR") in new stack
    -- Executing [s@macro-user-callerid:10] GotoIf("SIP/9205-0a1375c8", "0?continue") in new stack
    -- Executing [s@macro-user-callerid:11] Set("SIP/9205-0a1375c8", "__TTL=64") in new stack
    -- Executing [s@macro-user-callerid:12] GotoIf("SIP/9205-0a1375c8", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,19)
    -- Executing [s@macro-user-callerid:19] NoOp("SIP/9205-0a1375c8", "Using CallerID "Autograf PE" <9205>") in new stack
    -- Executing [8001@from-internal:2] Set("SIP/9205-0a1375c8", "MEETME_ROOMNUM=8001") in new stack
    -- Executing [8001@from-internal:3] GotoIf("SIP/9205-0a1375c8", "0?READPIN") in new stack
    -- Executing [8001@from-internal:4] Answer("SIP/9205-0a1375c8", "") in new stack
    -- Executing [8001@from-internal:5] Wait("SIP/9205-0a1375c8", "1") in new stack
    -- Executing [8001@from-internal:6] Set("SIP/9205-0a1375c8", "PINCOUNT=0") in new stack
    -- Executing [8001@from-internal:7] Read("SIP/9205-0a1375c8", "PIN|enter-conf-pin-number||||") in new stack
    -- <SIP/9205-0a1375c8> Playing 'enter-conf-pin-number' (language 'pt_BR')
    -- User entered '1234'
    -- Executing [8001@from-internal:8] GotoIf("SIP/9205-0a1375c8", "1?USER") in new stack
    -- Goto (from-internal,8001,16)
    -- Executing [8001@from-internal:16] Set("SIP/9205-0a1375c8", "MEETME_OPTS=") in new stack
    -- Executing [8001@from-internal:17] Goto("SIP/9205-0a1375c8", "STARTMEETME|1") in new stack
    -- Goto (from-internal,STARTMEETME,1)
    -- Executing [STARTMEETME@from-internal:1] MeetMe("SIP/9205-0a1375c8", "8001||1234") in new stack
  == Parsing '/etc/asterisk/meetme.conf': Found
  == Parsing '/etc/asterisk/meetme_additional.conf': Found
    -- <SIP/9205-0a1375c8> Playing 'conf-invalid' (language 'pt_BR')
  == Spawn extension (from-internal, STARTMEETME, 1) exited non-zero on 'SIP/9205-0a1375c8'
    -- Executing [h@from-internal:1] Macro("SIP/9205-0a1375c8", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/9205-0a1375c8", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/9205-0a1375c8", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/9205-0a1375c8", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("SIP/9205-0a1375c8", "") in new stack
  == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/9205-0a1375c8' in macro 'hangupcall'
  == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/9205-0a1375c8'
autograf*CLI>
Thank anyone who can help me!
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,565
Latest member
omarmenichetti
Top