te121p and gigabyte

Discussion in 'Gateways' started by arashino, Nov 27, 2010.

  1. arashino

    Joined:
    Jun 14, 2010
    Messages:
    118
    Likes Received:
    0
    hi everyone

    I have installed te121p digium card on gigabyte ga-ep43-ud3l in elastix 2.0.3. I have updated motherboards bios. when i take cat /proc/interrupts my output like this:

    [root@localhost ~]# cat /proc/interrupts
    CPU0 CPU1
    0: 224719 249787 IO-APIC-edge timer
    1: 0 2 IO-APIC-edge i8042
    7: 0 0 IO-APIC-edge parport0
    8: 0 3 IO-APIC-edge rtc
    9: 0 0 IO-APIC-level acpi
    12: 100 90 IO-APIC-edge i8042
    50: 0 0 IO-APIC-level uhci_hcd:usb4
    58: 0 0 IO-APIC-level uhci_hcd:usb7
    66: 9839 0 PCI-MSI ahci
    74: 806 0 PCI-MSI eth0
    90: 205 0 PCI-MSI HDA Intel
    169: 230370 205206 IO-APIC-level uhci_hcd:usb3, wcte12xp0
    225: 160 163 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb5, uhci_hcd:usb8
    233: 1 1 IO-APIC-level ehci_hcd:usb2, uhci_hcd:usb6
    NMI: 0 0
    LOC: 474411 474410
    ERR: 0
    MIS: 0

    my problem is wcte12xp0 share with uhci_hcd:usb3 . how can i solve this problem?thanks in advance
     
  2. arashino

    Joined:
    Jun 14, 2010
    Messages:
    118
    Likes Received:
    0
    in bios i have disabled usb controller and my problem solved. now wcte12xp0 has its own irq.
    :)
     

Share This Page