TE120P inbound call routing

Discussion in 'Gateways' started by bijoo_75, Jan 7, 2009.

  1. bijoo_75

    Joined:
    May 2, 2007
    Messages:
    21
    Likes Received:
    0
    hi,

    i have installed TE120P card with elastix. i have no problem on outbound calls.
    for the inbound calls i have maged teh zap-DIDs and directed to diffrent ip-phones.

    i am observing when i make call to my E1 line its changing the callerID and call is going to other ip phones as well.. i have checked the logs and i found this.

    Executing [s@from-zaptel:3] Set("Zap/4-1", "DID=0222163802") in new stack
    -- Executing [s@from-zaptel:4] NoOp("Zap/4-1", "DID is now 0222163802") in new stack
    -- Executing [s@from-zaptel:5] GotoIf("Zap/4-1", "1?zapok:notzap") in new stack
    -- Goto (from-zaptel,s,8)
    -- Executing [s@from-zaptel:8] NoOp("Zap/4-1", "Is a Zaptel Channel") in new stack
    -- Executing [s@from-zaptel:9] Set("Zap/4-1", "CHAN=4-1") in new stack
    -- Executing [s@from-zaptel:10] Set("Zap/4-1", "CHAN=4") in new stack
    -- Executing [s@from-zaptel:11] Macro("Zap/4-1", "from-zaptel-4|0222163802|1") in new stack
    -- Executing [s@macro-from-zaptel-4:1] NoOp("Zap/4-1", "Entering macro-from-zaptel-4 with DID = 0222163802 and setting to: 2163803") in new stack -- Executing [s@macro-from-zaptel-4:2] Set("Zap/4-1", "__FROM_DID=2163803") in new stack
    -- Executing [s@macro-from-zaptel-4:3] Goto("Zap/4-1", "from-trunk|2163803|1") in new stack
    -- Goto (from-trunk,2163803,1)
    == Channel 'Zap/4-1' jumping out of macro 'from-zaptel-4'
    -- Executing [2163803@from-trunk:1] NoOp("Zap/4-1", "Catch-All DID Match - Found 2163803 - You probably want a DID for this.") in new stack
    -- Executing [2163803@from-trunk:2] Goto("Zap/4-1", "ext-did|s|1") in new stack
    -- Goto (ext-did,s,1)
    -- Executing [s@ext-did:1] Set("Zap/4-1", "__FROM_DID=s") in new stack

    any idea why its changing /seting new new DID /
    please help

    Regards,

    Biju
     

Share This Page