TDM800P call disconnecting issue

snakeapit

Joined
Oct 20, 2009
Messages
19
Likes
0
Points
0
#1
Hi all,

I just bought TDM800p with only 4 fxs module and is my first time install in elastix server. I have been through all the setting and configuration based on "Elastix without fear" and got it working for incoming and outgoing call. The only issue is when the caller hangup the call, it takes about 6-10 rings to get my sip phone disconnected. I tweaked busydetect and busy count but stil no luck. Please help thanks in advance.

FYI: I just found out recently, some members here might already know. For user in AUstralia, Telstra PSTN doesnt carry incoming caller id and need to pay $AUD6 for the features. So i didnt bother to get the incoming caller id working :)


Here's the config.

chan_dahdi.conf
Code:
[trunkgroups]

[channels]
context=from-zaptel
signalling=fxs_ks
rxwink=300		; Atlas seems to use long (250ms) winks
usecallerid=yes
callerid=asreceived
sendcalleridafter=2
useincommingcalleridonzaptransfer=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=9.0
txgain=6.0
callgroup=1
pickupgroup=1
progzone=au

;Uncomment these lines if you have problems with the disconection of your analog lines
busydetect=no
;hanguponpolarityswitch=yes
busycount=3


immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf
dahdi-channels.conf
Code:
; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) 
;;; line="5 WCTDM/0/4 FXSKS"
signalling=fxs_ks
callerid=asreceived
useincommingcalleridonzaptransfer=yes
group=1
context=from-zaptel
channel => 5
callerid=
group=
context=default

;;; line="6 WCTDM/0/5 FXSKS"
signalling=fxs_ks
callerid=asreceived
useincommingcalleridonzaptransfer=yes
group=0
context=from-zaptel
channel => 6
callerid=
group=
context=default

;;; line="7 WCTDM/0/6 FXSKS"
signalling=fxs_ks
callerid=asreceived
useincommingcalleridonzaptransfer=yes
group=0
context=from-zaptel
channel => 7
callerid=
group=
context=default

;;; line="8 WCTDM/0/7 FXSKS"
signalling=fxs_ks
callerid=asreceived
useincommingcalleridonzaptransfer=yes
group=0
context=from-zaptel
channel => 8
callerid=
group=
context=default
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,565
Latest member
omarmenichetti
Top