T2 synchronisation problem

Discussion in 'Gateways' started by segadiarrah, Oct 15, 2009.

  1. segadiarrah

    Joined:
    Jun 18, 2009
    Messages:
    16
    Likes Received:
    0
    Hi,
    I have 2 E1 lines and 1 digium TE410P card with 2 span. I have an synchronization problem and have Span # 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW RED and Span # 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS YELLOW RED RECOVERING.

    This is my sytem.conf file
    # This file is parsed by the Dahdi Configurator, dahdi_cfg
    #
    # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS YELLOW RED
    span=1,1,0,ccs,hdb3
    # termtype: te
    bchan=1-15,17-31
    dchan=16
    echocanceller=oslec,1-15,17-31

    # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS YELLOW RED
    span=2,2,0,ccs,hdb3
    # termtype: te
    bchan=32-46,48-62
    dchan=47
    echocanceller=oslec,32-46,48-62

    I had try
    span=1,0,0,ccs,hdb3
    span=2,0,0,ccs,hdb3
    alarm : yellow

    and
    span=2,2,0,ccs,hdb3
    span=1,2,0,ccs,hdb3
    alarm: red
    thanks for your help
     

Share This Page