SPA3102

Discussion in 'General' started by Oosthuizen, Feb 25, 2011.

  1. Oosthuizen

    Joined:
    Jun 22, 2010
    Messages:
    59
    Likes Received:
    0
    hi there guys and girls
    i want to put a linksys spa3102 on my Elastix to handle incoming calls, each time i phone in i get "number not in service please check number and dial again"
    when debugging in putty i can see the call reaches elastic but then gets rejected

    To admit i don't know enough to see why, please can someone help me - i used elastix without treas as a guide on installation

    on debug is get the following
    == Using SIP RTP CoS mark 5
    -- Called vox_out/0314641544
    -- SIP/vox_out-00000034 is making progress passing it to SIP/201-00000032
    == Using SIP RTP TOS bits 184
    == Using SIP RTP CoS mark 5
    -- Executing [0314641544@from-sip-external:1] NoOp("SIP/192.168.1.111-00000035", "Received incoming SIP connection from unknown peer to 0314641544") in new stack
    -- Executing [0314641544@from-sip-external:2] Set("SIP/192.168.1.111-00000035", "DID=0314641544") in new stack
    -- Executing [0314641544@from-sip-external:3] Goto("SIP/192.168.1.111-00000035", "s,1") in new stack
    -- Goto (from-sip-external,s,1)
    -- Executing [s@from-sip-external:1] GotoIf("SIP/192.168.1.111-00000035", "0?checklang:noanonymous") in new stack
    -- Goto (from-sip-external,s,5)
    -- Executing [s@from-sip-external:5] Set("SIP/192.168.1.111-00000035", "TIMEOUT(absolute)=15") in new stack
    Channel will hangup at 2011-02-25 08:26:08.306 SAST.
    -- Executing [s@from-sip-external:6] Answer("SIP/192.168.1.111-00000035", "") in new stack
    -- Executing [s@from-sip-external:7] Wait("SIP/192.168.1.111-00000035", "2") in new stack
    -- SIP/vox_out-00000034 answered SIP/201-00000032
    -- Executing [s@from-sip-external:8] Playback("SIP/192.168.1.111-00000035", "ss-noservice") in new stack
    -- <SIP/192.168.1.111-00000035> Playing 'ss-noservice.gsm' (language 'en')
    -- Executing [s@from-sip-external:9] PlayTones("SIP/192.168.1.111-00000035", "congestion") in new stack
    -- Executing [s@from-sip-external:10] Congestion("SIP/192.168.1.111-00000035", "5") in new stack
    == Spawn extension (from-sip-external, s, 10) exited non-zero on 'SIP/192.168.1.111-00000035'
    -- Executing [h@from-sip-external:1] Hangup("SIP/192.168.1.111-00000035", "") in new stack
    == Spawn extension (from-sip-external, h, 1) exited non-zero on 'SIP/192.168.1.111-00000035'
     
  2. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    Hi.

    Here, we haven't any config details from you.
    At first, read Elastix Without Tears and read SPA3102 section.
    Second, try to discribe your config (side Elastix and side SPA) instead only some debug or tracing.

    Here, maybe an issue service, but why and what else...?
     
  3. rgranados

    Joined:
    May 22, 2010
    Messages:
    61
    Likes Received:
    0
    Re: Re:SPA3102

    This is the configuration that i have for the trunk that i use for the SPA3102 in my Elastix 1.6

    Peer Details

    disallow=all
    allow=ulaw
    canreinvite=no
    context=from-trunk
    dtmfmode=rfc2833
    host=xxx.xxx.xxx.xxx
    incominglimit=1
    nat=never
    port=5061
    qualify=yes
    secret=test
    type=friend
    username=SPA3102
    -------------
    User Details

    disallow=all
    allow=ulaw
    canreinvite=no
    context=from-trunk
    dtmfmode=rfc2833
    host=192.168.1.53
    incominglimit=1
    nat=never
    port=5061
    qualify=yes
    secret=test
    type=friend
    username=SPA3102

    The SPA 3102 is configured to send a fixed number every call it receives.

    The only issue i have is that the CID is not working.

    Hope it works for you...
     
  4. Oosthuizen

    Joined:
    Jun 22, 2010
    Messages:
    59
    Likes Received:
    0
    Re: Re:SPA3102

    Thank youi really appreciate it i will let you know the outcome

    Warm Regards
    Kobus
     

Share This Page