service code

Discussion in 'General' started by justbox, Oct 19, 2010.

  1. justbox

    Joined:
    Jul 28, 2010
    Messages:
    14
    Likes Received:
    0
    How to register now such a service code

    exten => _ * 10X., 1, dial (SIP/nonoh/84956610118, 30, D (112211 # w $ {EXTEN: 3} #)
    -------------------------------------------------- -------------------------------------------------- ---------

    I am writing in extetion_custom

    [Service_arctel_1]
    exten => _ * 10X., 1, dial (SIP/nonoh/6610118, 30, D (567567 # w $ {EXTEN: 3} #)

    call number * 10 I am told that the number does not exist in the CLI when calling two lines of goods
    == Using SIP RTP TOS bits 184
    == Using SIP RTP CoS mark 5

    Write how to make the access code to enter the ARCTEL line!?
     
  2. trymes

    Joined:
    Aug 19, 2009
    Messages:
    228
    Likes Received:
    0
    Can you be a little more specific?

    What are you trying to do, and why are you manually editing the config files? That might be needed occasionally, but normally should not be needed.

    Tom
     
  3. justbox

    Joined:
    Jul 28, 2010
    Messages:
    14
    Likes Received:
    0
    Thank you for responding!

    I need to set at * 10

    The number for 6610118 if the connection is automatically pressed calculation was done # PIN #
     
  4. trymes

    Joined:
    Aug 19, 2009
    Messages:
    228
    Likes Received:
    0
    In other words, you want a user to dial *10 and the system would dial the phone number 6610118? When is the PIN entered?

    I think you can most easily do this by adding a miscellaneous Destination in FreePBX, and then a Miscellaneous Application that points to that destination, with *10 defined as the feature code.

    You should not need to edit the files manually.

    Tom
     

Share This Page