Sangoma cards and Elastix

Discussion in 'General' started by Maxwell, Jun 6, 2007.

  1. Maxwell

    Joined:
    Jun 5, 2007
    Messages:
    1
    Likes Received:
    0
    Has anyone suceeded in installing Sangoma Cards and elastrix. I have tried using some basic instructions but have found I cannt even get the kernel source down to rebuild zaptel.
     
  2. hetii

    Joined:
    Jun 7, 2007
    Messages:
    32
    Likes Received:
    0
    Hello I reedit this post again :)

    i Put here my way how to run SANGOMA card into ELASTIX :)

    Please download attached script and save into install.sh
    next change permission to 777 ie.

    chmod 777 install.sh

    then: mkdir master-tools
    and now put into 'master-tools' directory, files from :
    ftp://ftp.sangoma.com/linux/current_wan ... .3.4-9.tgz
    ftp://ftp.digium.com/pub/zaptel/zaptel-1.4.3.tar.gz
    http://people.redhat.com/dledford/Infin ... 5.i686.rpm

    but this step is not required because this script check if we have there correct files, if not he download itself this file.

    I don`t now why wanpipe print me something like this :(

    Default Compilation:
    --------------------
    WANPIPE drivers will include following standard WAN
    protocols: Frame Relay, CHDLC, PPP, X25 and ADSL
    Custom Compilation:
    ------------------
    Customise WANPIPE driver compilation to add only the
    protocols that you need. This way one can reduce
    the size of the WANPIPE kernel drivers.

    Refer to the WapipeIntallation.(pdf/txt) documentation.

    cp: cannot stat `/usr/src/wanpipe-2.3.4-9/patches/kdrivers/src/net/sdladrv.mod.c': No such file or directory
    cp: cannot stat `/usr/src/wanpipe-2.3.4-9/patches/kdrivers/src/net/wanrouter.mod.c': No such file or directory
    cp: cannot stat `/usr/src/wanpipe-2.3.4-9/patches/kdrivers/src/net/wanpipe_syncppp.mod.c': No such file or directory
    cp: cannot stat `/usr/src/wanpipe-2.3.4-9/patches/kdrivers/src/net/wanpipe.mod.c': No such file or directory
    cp: cannot stat `/usr/src/wanpipe-2.3.4-9/patches/kdrivers/src/net/af_wanpipe.mod.c': No such file or directory
    ----------------------------------------------------------
    WAN Router v2.3.4-9 Installation Script
    Copyright (c) 1995-2007, Sangoma Technologies Inc.
    ----------------------------------------------------------

    ....

    but IMHO its not imported :)

    Please run wancfg_zaptel to configured your card.

    Best Regards

    Post edited by: hetii, at: 2007/06/12 09:37<br><br>Post edited by: hetii, at: 2007/06/12 09:43
     
  3. hetii

    Joined:
    Jun 7, 2007
    Messages:
    32
    Likes Received:
    0

Share This Page