SANGOMA blocks trunks when start up

Discussion in 'Gateways' started by waraltca, Nov 16, 2009.

  1. waraltca

    Joined:
    Nov 5, 2009
    Messages:
    17
    Likes Received:
    0
    Hi there..

    I need your help to resolve this conflict.
    The problem is that when I shutdown and restart the elastix 1.3-2 the sangoma a200 analog blocks me the outgoing calls.
    Then if I receive an incoming call or unplug and plug the wire from elastix, It begins to work.

    Is there sometrhing I should configure to resolve that??

    Thanks.
     
  2. marc.sangoma

    Joined:
    Jul 20, 2009
    Messages:
    14
    Likes Received:
    0
    Hi,

    Our card does not block the calls this is actually an issue with Dadhi/Asterisk line detection. Our line detection works great you can go to http://wiki.sangoma.com/wanpipe-linux-a ... _debugging and then step 5 will show you how to check the line. After a few tests you will see that we know exactly when the line is plugged in.

    Now a quick fix which may resolve the issue is go to http://wiki.sangoma.com/Asterisk-FAQ#ou ... lls-1.4.22 and follow the steps there. Now if the issue is still occurring then you will have to contact the Asterisk/Dahdi developers and have them look into this or try their latest version.
     
  3. waraltca

    Joined:
    Nov 5, 2009
    Messages:
    17
    Likes Received:
    0
    hi marc...

    I resolved the problem installing a newer version of elastix 1.6-12 and the problem was fixed.
    I'm not sure why the problem occured but changing the version worked for me.

    Thanks for you time.

    regards.
     

Share This Page