Sangoma A200 Driver installation

Joined
Mar 15, 2011
Messages
7
Points
1
Good day to all

I'm installing an A200 Sangoma card following the wiki from sangoma, but I came with a problem.

While compiling wanpipe utilities it shows the message:

Starting up device: wanpipe1


wanconfig: WAN device wanpipe1 driver load failed !!

: Wanpipe version mismatch between utilites
: and kernel drivers:
: Util Ver=7.0.20.0, Driver Ver=7.0.14.3.0

Configuring interfaces: w1g1 w1g1: ERROR while getting interface flags: No such device

done.
Waiting for Dahdi /dev/dahdi ...
DAHDI Tools Version - 2.10.2

DAHDI Version: 2.10.2
Echo Canceller(s):
Configuration
======================


0 channels to configure.


Error executing command:


this is part of the /var/log/messages that I got

Jun 28 20:54:10 localhost kernel: wanec_remove_dev: Unregistering Wanpipe ECDEV Device!
Jun 28 20:54:10 localhost kernel: WANEC Layer: Unloaded
Jun 28 20:54:10 localhost kernel: af_wanpipe: Unregistering Wanpipe API Socket Module
Jun 28 20:54:10 localhost kernel: NET: Unregistered protocol family 25
Jun 28 20:54:10 localhost kernel: WANPIPE: TDM Codecs unloaded.
Jun 28 20:54:10 localhost kernel:
Jun 28 20:54:10 localhost kernel: wanpipe: WANPIPE Modules Unloaded.
Jun 28 20:54:10 localhost kernel: usbcore: deregistering interface driver sdlausb
Jun 28 20:54:10 localhost kernel: dahdi: Telephony Interface Unloaded
Jun 28 20:54:10 localhost kernel: dahdi: Version: 2.10.2
Jun 28 20:54:10 localhost kernel: dahdi: Telephony Interface Registered on major 196
Jun 28 20:54:10 localhost kernel: WANPIPE(tm) Hardware Support Module 7.0.14.3.0 (c) 1994-2013 Sangoma Technologies Inc
Jun 28 20:54:10 localhost kernel: usbcore: registered new interface driver sdlausb
Jun 28 20:54:10 localhost kernel: WANPIPE(tm) Interface Support Module 7.0.14.3.0 (c) 1994-2013 Sangoma Technologies Inc
Jun 28 20:54:10 localhost kernel: WANPIPE(tm) Multi-Protocol WAN Driver Module 7.0.14.3.0 (c) 1994-2013 Sangoma Technologies Inc
Jun 28 20:54:10 localhost kernel: wanpipe: Probing for WANPIPE hardware.
Jun 28 20:54:10 localhost kernel: wanpipe: AFT-A200-SH PCIe FXO/FXS card found (HDLC rev.13), cpu(s) 1, bus #2, slot #4, irq #16
Jun 28 20:54:10 localhost kernel: wanpipe: Allocating maximum 1 devices: wanpipe1 - wanpipe1.
Jun 28 20:54:10 localhost kernel: WANPIPE: TDM Codecs Initialized
Jun 28 20:54:10 localhost kernel: WANPIPE(tm) Socket API Module 7.0.14.3.0 (c) 1994-2013 Sangoma Technologies Inc
Jun 28 20:54:10 localhost kernel: NET: Registered protocol family 25
Jun 28 20:54:10 localhost kernel: WANPIPE(tm) WANEC Layer 7.0.14.3.0 (c) 1995-2006 Sangoma Technologies Inc.
Jun 28 20:54:10 localhost kernel: wanec_create_dev: Registering Wanpipe ECDEV Device!


Does anybody know how to fix Driver version? I tried using ./Setup drivers on the Wanpipe folder (is the latest version, also Elastix is version 4, a fresh installation)

thanks in advance
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,994
Messages
131,110
Members
17,716
Latest member
Orbit114
Top