Sangoma A104 Problem

Joined
Nov 26, 2007
Messages
39
Points
6
I have Sangoma A104 (4 E1), In TB 2.29 this card work excelent.
I like Elastix, but When a tried to Install this Sangoma card was impossible to make a call.
I have the Kernel source, a Zaptel source in my Box, and install the Sangoma driver from source.
My Box find this card and the card is configurate excelent, but when I tried to make a call, I have problem. The asterisk cli send me the message CHANUNAVAIL

Thanks,


Executing [200@from-internal:1] Set("SIP/1003-097fb8c0", "INTRACOMPANYROU TE=YES") in new stack
-- Executing [200@from-internal:2] Macro("SIP/1003-097fb8c0", "dialout-trunk |1|200||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/1003-097fb8c0", "DIAL_TRUNK= 1") in new stack
-- Executing [s@macro-dialout-trunk:2] Set("SIP/1003-097fb8c0", "DIAL_NUMBER =200") in new stack
-- Executing [s@macro-dialout-trunk:3] Set("SIP/1003-097fb8c0", "ROUTE_PASSW D=") in new stack
-- Executing [s@macro-dialout-trunk:4] GotoIf("SIP/1003-097fb8c0", "1?noauth ") in new stack
-- Goto (macro-dialout-trunk,s,6)
-- Executing [s@macro-dialout-trunk:6] GotoIf("SIP/1003-097fb8c0", "0?disabl etrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:7] Set("SIP/1003-097fb8c0", "_NODEST=") in new stack
-- Executing [s@macro-dialout-trunk:8] Set("SIP/1003-097fb8c0", "DIAL_TRUNK_ OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:9] Set("SIP/1003-097fb8c0", "GROUP()=OUT _1") in new stack
-- Executing [s@macro-dialout-trunk:10] Macro("SIP/1003-097fb8c0", "user-cal lerid|SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("SIP/1003-097fb8c0", "user-calle rid: device 1003") in new stack
-- Executing [s@macro-user-callerid:2] Set("SIP/1003-097fb8c0", "AMPUSER=100 3") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("SIP/1003-097fb8c0", "0?report ") in new stack
-- Executing [s@macro-user-callerid:4] GotoIf("SIP/1003-097fb8c0", "0?start" ) in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1003-097fb8c0", "REALCALLERI DNUM=1003") in new stack
-- Executing [s@macro-user-callerid:6] NoOp("SIP/1003-097fb8c0", "REALCALLER IDNUM is 1003") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1003-097fb8c0", "AMPUSER=100 3") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1003-097fb8c0", "AMPUSERCIDN AME=Telesoft (Cisco 7960)") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/1003-097fb8c0", "0?report ") in new stack
-- Executing [s@macro-user-callerid:10] Set("SIP/1003-097fb8c0", "AMPUSERCID =1003") in new stack
-- Executing [s@macro-user-callerid:11] Set("SIP/1003-097fb8c0", "CALLERID(a ll)="Telesoft (Cisco 7960)" <1003>") in new stack
-- Executing [s@macro-user-callerid:12] Set("SIP/1003-097fb8c0", "REALCALLER IDNUM=1003") in new stack
-- Executing [s@macro-user-callerid:13] NoOp("SIP/1003-097fb8c0", "TTL: ARG 1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("SIP/1003-097fb8c0", "1?conti nue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("SIP/1003-097fb8c0", "Using Cal lerID "Telesoft (Cisco 7960)" <1003>") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/1003-097fb8c0", "record-e nable|1003|OUT") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/1003-097fb8c0", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("SIP/1003-097fb8c0", "recordingch eck|20071206-102259|1196958179.144") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
recordingcheck|20071206-102259|1196958179.144: Outbound recording not enabled
-- AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("SIP/1003-097fb8c0", "No recordi ng needed") in new stack
-- Executing [s@macro-dialout-trunk:12] GotoIf("SIP/1003-097fb8c0", "1?skipo utcid") in new stack
-- Goto (macro-dialout-trunk,s,15)
-- Executing [s@macro-dialout-trunk:15] GotoIf("SIP/1003-097fb8c0", "1?nomax ") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] AGI("SIP/1003-097fb8c0", "fixlocalpr efix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:18] Set("SIP/1003-097fb8c0", "OUTNUM=200 ") in new stack
-- Executing [s@macro-dialout-trunk:19] Set("SIP/1003-097fb8c0", "custom=ZAP /g0") in new stack
-- Executing [s@macro-dialout-trunk:20] GotoIf("SIP/1003-097fb8c0", "1?gocal l") in new stack
-- Goto (macro-dialout-trunk,s,24)
-- Executing [s@macro-dialout-trunk:24] GotoIf("SIP/1003-097fb8c0", "0?custo mtrunk") in new stack
-- Executing [s@macro-dialout-trunk:25] Dial("SIP/1003-097fb8c0", "ZAP/g0/20 0|300|tr") in new stack
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [s@macro-dialout-trunk:26] Goto("SIP/1003-097fb8c0", "s-CHANUNA VAIL|1") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/1003-097fb8c0 ", "1?noreport") in new stack
-- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3)
-- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/1003-097fb8c0", "TRUNK Dial failed due to CHANUNAVAIL - failing through to other trunks") in ne w stack
-- Executing [200@from-internal:3] Macro("SIP/1003-097fb8c0", "outisbusy|") in new stack
-- Executing [s@macro-outisbusy:1] Playback("SIP/1003-097fb8c0", "all-circui ts-busy-now|noanswer") in new stack
-- Executing [s@macro-outisbusy:2] Playback("SIP/1003-097fb8c0", "pls-try-ca ll-later|noanswer") in new stack
-- Executing [s@macro-outisbusy:3] Macro("SIP/1003-097fb8c0", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("SIP/1003-097fb8c0", "w") in ne w stack
-- Executing [s@macro-hangupcall:2] NoCDR("SIP/1003-097fb8c0", "") in new st ack
-- Executing [s@macro-hangupcall:3] GotoIf("SIP/1003-097fb8c0", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("SIP/1003-097fb8c0", "1?skipblkvm ") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("SIP/1003-097fb8c0", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("SIP/1003-097fb8c0", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/1003-097f b8c0' in macro 'hangupcall'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/1003-097f b8c0' in macro 'outisbusy'
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/1003-097f b8c0'
-- Remote UNIX connection
-- Remote UNIX connection disconnected
voip*CLI>
 

Members online

No members online now.

Forum statistics

Threads
30,988
Messages
131,101
Members
17,716
Latest member
Orbit114
Top