Samba on Elastix 0.84

Discussion in 'General' started by agigliotti, Jul 24, 2007.

  1. agigliotti

    Joined:
    Jul 23, 2007
    Messages:
    1
    Likes Received:
    0
    I want install Samba into Elastix. Is posible?

    Thank You.
     
  2. nava

    Joined:
    Jun 16, 2007
    Messages:
    24
    Likes Received:
    0
    You use yum

    yum install samba samba-common

    If you need client or swat

    yum install samba-client
    yum install samba-swat

    Saludos
     
  3. tbberetin

    Joined:
    Aug 19, 2007
    Messages:
    11
    Likes Received:
    0
    Can you elaborate this more? What about configuration file smb?
     
  4. tbberetin

    Joined:
    Aug 19, 2007
    Messages:
    11
    Likes Received:
    0
    Can you elaborate this more? What about configuration file smb?
     
  5. createinfor

    Joined:
    Aug 5, 2007
    Messages:
    4
    Likes Received:
    0
    Hi, this worked for me.
    After you installed samba-common go to:
    /etc/samba
    nano (or vi) smb.conf
    delete everything (or create a new smb.conf file)
    use the following scripts:

    [global]
    workgroup = (your workgroup name in your local net)
    server string = (anything)
    local master = no
    domain master = no
    preferred master = no
    password server = None
    guest ok = yes
    guest account = root
    security = SHARE
    dns proxy = no

    [share]
    path = /
    guest ok = yes
    writeable = yes
    create mask = 0777

    Save it and then use the following commands to turn it on:

    /etc/init.d/smb start

    And use the following command to start automatic with the booting of the asterisk:

    chkconfig --level 345 smb on

    However you have to be carefull as there is no user or passsword. This means that anyone on your network can access you asterisk server.

    Carlos
     
  6. createinfor

    Joined:
    Aug 5, 2007
    Messages:
    4
    Likes Received:
    0
    Hi, this worked for me.
    After you installed samba-common go to:
    /etc/samba
    nano (or vi) smb.conf
    delete everything (or create a new smb.conf file)
    use the following scripts:

    [global]
    workgroup = (your workgroup name in your local net)
    server string = (anything)
    local master = no
    domain master = no
    preferred master = no
    password server = None
    guest ok = yes
    guest account = root
    security = SHARE
    dns proxy = no

    [share]
    path = /
    guest ok = yes
    writeable = yes
    create mask = 0777

    Save it and then use the following commands to turn it on:

    /etc/init.d/smb start

    And use the following command to start automatic with the booting of the asterisk:

    chkconfig --level 345 smb on

    However you have to be carefull as there is no user or passsword. This means that anyone on your network can access you asterisk server.

    Carlos
     
  7. tbberetin

    Joined:
    Aug 19, 2007
    Messages:
    11
    Likes Received:
    0
    Ok that is what i was looking for. Great help...
     

Share This Page