RTL81118 LAN Driver It does not work

Discussion in 'General' started by ElasMex, Feb 27, 2008.

  1. ElasMex

    Joined:
    Oct 22, 2007
    Messages:
    493
    Likes Received:
    0
    I have a card Gibabyte P35-DS3R card with a RealTek RTL8111b installing Elastix but is unable to connect to the network when it starts Elastix.
    Already colocque lspci and I commanded the configuration of the cards but not powered.

    I can support that work
     
  2. mbit

    Joined:
    Jul 4, 2007
    Messages:
    466
    Likes Received:
    0
    Hi

    You can support the network driver with a couple of external rpms

    You basically need to get

    kernel-devel
    dkms
    dkms-r1000

    When you install those 3 rpms it will be working.
     
  3. ElasMex

    Joined:
    Oct 22, 2007
    Messages:
    493
    Likes Received:
    0
    Hi Mbit

    Already dkms alight and the driver for http://dag.wieers.com/rpm/packages.php page for the board but I called the kernel-devel-2.6.18-8.el5.i686.rpm but not what I lose any page.

    I can help slow or I can isnalar the controller card RTL8111b
     
  4. ElasMex

    Joined:
    Oct 22, 2007
    Messages:
    493
    Likes Received:
    0
    Hi Mbit

    Already dkms alight and the driver for http://dag.wieers.com/rpm/packages.php page for the board but I called the kernel-devel-2.6.18-8.el5.i686.rpm but not what I lose any page.

    I can help slow or I can isnalar the controller card RTL8111b
     
  5. markt

    Joined:
    Oct 29, 2007
    Messages:
    9
    Likes Received:
    0
    I put on Elastix 1.0 Final, motherboard k9n neo v2

    cd /usr/src
    wget ftp://210.51.181.211/cn/nic/r8168-8.005.00.tar.bz2
    tar vjxf r8168-8.005.00.tar.bz2
    cd r8168-8.005.00
    make install
    depmod -a
    insmod ./src/r8168.ko
    ifconfig -a
    service network restart
     

Share This Page