r4fxo-ec callerid problem

Discussion in 'Gateways' started by gabriel, Mar 21, 2008.

  1. gabriel

    Joined:
    Jun 9, 2007
    Messages:
    31
    Likes Received:
    0
    I have some problems with callerid. I use rhino r4fxo-ec outbound callerid works but inbound is not working. here is my zapata.conf maybe I mist something:

    [trunkgroups]

    [channels]
    context=default
    callerid=asreceived
    sendcalleridafter=2
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=yes
    relaxdtmf=yes
    rxgain=0.0
    txgain=0.0
    group=1
    callgroup=1
    pickupgroup=1
    immediate=no


    context=from-zaptel
    group=0
    signalling = fxs_ks
    channel => 1

    context=from-zaptel
    group=0
    signalling = fxs_ks
    channel => 2

    context=from-zaptel
    group=0
    signalling = fxs_ks
    channel => 3

    context=from-zaptel
    group=0
    signalling = fxs_ks
    channel => 4


    Thank you

    Gabe
     
  2. rejil.rajan

    Joined:
    Apr 8, 2007
    Messages:
    154
    Likes Received:
    0
    Hi

    Could u test by connecting the line to a callerID phone and see if your getting caller ID on that. If your not, then it means that the service provider is not sending you the caller ID
     

Share This Page