R1 Telmex no entran las llamdas

PACOI

Joined
May 5, 2008
Messages
10
Likes
0
Points
0
#1
Buen dia estoy configurando el E1 con Telmex.

Anteriormente con las versiones de Elastix que contenian Unicall funcionaba correctamente. Esto con una tarjeta TE110P ademas tiene una X100P

Ahora deseo probarla con la nueva version de Elastix que maneja dahdi y no me funciona del todo bien, solo puedo sacar llamadas en las llamadas entrantes me mrca siempre ocupado.

Esta es mi configuracion.

/etc/dahdi/system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Thu Dec 3 21:27:35 2009 -- do not hand edit
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/ RED
span=1,1,0,cas,hdb3
cas=1-15:1101
dchan=16
cas=17-31:1101
#echocanceller=oslec,1-15,17-31

# Span 2: WCFXO/0 "Generic Clone Board 1" RED
fxsks=32
channels=32
#echocanceller=oslec,32

# Global data

loadzone = mx
defaultzone = mx

/etc/asterisk/chan_dahdi.conf

[trunkgroups]
[channels]

language=es
switchtype=national
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no
;MFCR2 settings
signalling=mfcr2
mfcr2_variant=ar
mfcr2_get_ani_first=no
mfcr2_max_ani=10
mfcr2_max_dnis=4
mfcr2_category=national_subscriber
mfcr2_logdir=span1
mfcr2_logging=all
mfcr2_call_files=yes
mfcr2_metering_pulse_timeout=-1
context=e1-incoming
group=0
callgroup=0
pickupgroup=0
channel => 1-15,17-31

language=es
context=incoming-e1
switchtype=national
signalling=fxs_ks
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
callerid=asreceived

canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=3.0
txgain=8.0
group=1
callgroup=1
pickupgroup=1
immediate=no
busydetect=yes
busycount=6
pulsedial=yes
musiconhold=default
channel => 32[color=][/color]

Para recibir los DID tengo lo siguiente
Y asi sucesivamente
exten => _9615,3,Hangup()
exten => _9616,1,Answer()
exten => _9616,2,Dial(SIP/616,15,tT)
exten => _9616,3,Hangup()
exten => _9617,1,Answer()
exten => _9617,2,Dial(SIP/617,15,tT)
exten => _9617,3,Hangup()

Cual podria ser el error

Esto me envia en los logs del asterisk

[13:24:16:737] [Thread: 18193296] [Chan 1] - Call started at Sat Dec 5 13:24:16 2009 on chan 1
[13:24:16:737] [Thread: 18193296] [Chan 1] - CAS Tx >> [SEIZE ACK] 0x0C
[13:24:16:738] [Thread: 18193296] [Chan 1] - CAS Raw Tx >> 0x0D
[13:24:16:871] [Thread: 18193296] [Chan 1] - MF Rx << 9 [ON]
[13:24:16:871] [Thread: 18193296] [Chan 1] - Attempting to cancel timer timer 0
[13:24:16:871] [Thread: 18193296] [Chan 1] - Cannot cancel timer 0
[13:24:16:871] [Thread: 18193296] [Chan 1] - Getting DNIS digit 9
[13:24:16:871] [Thread: 18193296] [Chan 1] - DNIS so far: 9, expected length: 4
[13:24:16:871] [Thread: 18193296] [Chan 1] - Requesting next DNIS with signal 0x31.
[13:24:16:871] [Thread: 18193296] [Chan 1] - MF Tx >> 1 [ON]
[13:24:16:931] [Thread: 18193296] [Chan 1] - MF Rx << 9 [OFF]
[13:24:16:931] [Thread: 18193296] [Chan 1] - MF Tx >> 1 [OFF]
[13:24:16:991] [Thread: 18193296] [Chan 1] - MF Rx << 6 [ON]
[13:24:16:991] [Thread: 18193296] [Chan 1] - Attempting to cancel timer timer 2
[13:24:16:991] [Thread: 18193296] [Chan 1] - timer id 2 found, cancelling it now
[13:24:16:991] [Thread: 18193296] [Chan 1] - Getting DNIS digit 6
[13:24:16:991] [Thread: 18193296] [Chan 1] - DNIS so far: 96, expected length: 4
[13:24:16:991] [Thread: 18193296] [Chan 1] - Requesting next DNIS with signal 0x31.
[13:24:16:991] [Thread: 18193296] [Chan 1] - MF Tx >> 1 [ON]
[13:24:17:051] [Thread: 18193296] [Chan 1] - MF Rx << 6 [OFF]
[13:24:17:051] [Thread: 18193296] [Chan 1] - MF Tx >> 1 [OFF]
[13:24:17:131] [Thread: 18193296] [Chan 1] - MF Rx << 6 [ON]
[13:24:17:131] [Thread: 18193296] [Chan 1] - Attempting to cancel timer timer 3
[13:24:17:131] [Thread: 18193296] [Chan 1] - timer id 3 found, cancelling it now
[13:24:17:131] [Thread: 18193296] [Chan 1] - Getting DNIS digit 6
[13:24:17:131] [Thread: 18193296] [Chan 1] - DNIS so far: 966, expected length: 4
[13:24:17:131] [Thread: 18193296] [Chan 1] - Requesting next DNIS with signal 0x31.
[13:24:17:131] [Thread: 18193296] [Chan 1] - MF Tx >> 1 [ON]
[13:24:17:191] [Thread: 18193296] [Chan 1] - MF Rx << 6 [OFF]
[13:24:17:191] [Thread: 18193296] [Chan 1] - MF Tx >> 1 [OFF]
[13:24:17:271] [Thread: 18193296] [Chan 1] - MF Rx << 5 [ON]
[13:24:17:271] [Thread: 18193296] [Chan 1] - Attempting to cancel timer timer 4
[13:24:17:271] [Thread: 18193296] [Chan 1] - timer id 4 found, cancelling it now
[13:24:17:271] [Thread: 18193296] [Chan 1] - Getting DNIS digit 5
[13:24:17:271] [Thread: 18193296] [Chan 1] - DNIS so far: 9665, expected length: 4
[13:24:17:271] [Thread: 18193296] [Chan 1] - Done getting DNIS!
[13:24:17:271] [Thread: 18193296] [Chan 1] - MF Tx >> 5 [ON]
[13:24:17:331] [Thread: 18193296] [Chan 1] - MF Rx << 5 [OFF]
[13:24:17:331] [Thread: 18193296] [Chan 1] - MF Tx >> 5 [OFF]
[13:24:17:409] [Thread: 18193296] [Chan 1] - Bits changed from 0x00 to 0x08
[13:24:17:409] [Thread: 18193296] [Chan 1] - CAS Rx << [CLEAR FORWARD] 0x08
[13:24:17:409] [Thread: 18193296] [Chan 1] - Far end disconnected. Reason: Normal Clearing
[13:24:17:409] [Thread: 18193296] [Chan 1] - Call ended
[13:24:17:409] [Thread: 18193296] [Chan 1] - Attempting to cancel timer timer 0
[13:24:17:409] [Thread: 18193296] [Chan 1] - Cannot cancel timer 0

Espero me ayuden a resolver el problema

Saludos!!
 

asepulveda

Joined
Jun 23, 2008
Messages
400
Likes
0
Points
0
#2
puedes poner que tienen tus archivos dahdi_channels.conf y chan_dadhi.conf?
 

PACOI

Joined
May 5, 2008
Messages
10
Likes
0
Points
0
#3
Buena noche

Gracias de antemano por la ayuda pero ya resolvi el problema que tenia con las lineas que siempre me marcaban ocupadas

El problema era en la configuracion de extensions.conf

El archivo estaba corrupto lo tuve que crear nuevamente

Y funciono correctamente

Tanto llamadas de salida como de entrada

[e1-incoming]

exten => _9600,1,Wait,1
exten => _9600,1,Answer
exten => _9600,n,Playback(bienvenida)
exten => _9600,n,Wait,1
exten => _9601,1,Answer()
exten => _9601,2,Dial(SIP/601,15,tT)
exten => _9601,3,Hangup()


Saludos!!!
 

Members online

Latest posts

Forum statistics

Threads
30,901
Messages
130,885
Members
17,562
Latest member
colak
Top