problems with some incomming faxes

Discussion in 'General' started by walidouda, Sep 16, 2009.

  1. walidouda

    Joined:
    Apr 1, 2009
    Messages:
    4
    Likes Received:
    0
    I have elastix 1.5.2, openvox 1200p card.

    I am facing sometimes issues with receiving faxes.

    here is the log:

    Aug 24 12:42:46.08: [ 3080]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 74 CC>
    Aug 24 12:42:46.08: [ 3080]: <-- data [32]
    Aug 24 12:42:46.08: [ 3080]: <-- data [2]
    Aug 24 12:42:48.04: [ 3080]: --> [7]
    Aug 24 12:42:48.04: [ 3080]: <-- HDLC<23:FF C0 02 86 2E 36 AE CE 76 F6 C2 04 A6 C6 82 04 04 04 04 04 04 04 04>
    Aug 24 12:42:48.04: [ 3080]: <-- data [23]
    Aug 24 12:42:48.04: [ 3080]: <-- data [2]
    Aug 24 12:42:48.86: [ 3080]: --> [7]
    Aug 24 12:42:48.86: [ 3080]: <-- HDLC<13:FF C8 01 00 73 5F 23 01 FB C1 01 01 18>
    Aug 24 12:42:48.86: [ 3080]: <-- data [13]
    Aug 24 12:42:48.86: [ 3080]: <-- data [2]
    Aug 24 12:42:49.46: [ 3080]: --> [2]
    Aug 24 12:42:49.46: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:42:50.28: [ 3080]: --> [7]
    Aug 24 12:42:51.90: [ 3080]: --> HDLC<25:FF C0 C2 8C 4C CC 2C 6C CC CC 04 04 04 04 04 04 04 04 04 04 04 04 04 4C D1>
    Aug 24 12:42:51.90: [ 3080]: --> [2]
    Aug 24 12:42:51.90: [ 3080]: REMOTE TSI "3364321"
    Aug 24 12:42:51.90: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:42:52.22: [ 3080]: --> [7]
    Aug 24 12:42:52.22: [ 3080]: --> HDLC<11:FF C8 C1 00 60 15 01 01 00 0A 70>
    Aug 24 12:42:52.26: [ 3080]: --> [2]
    Aug 24 12:42:52.26: [ 3080]: REMOTE wants 9600 bit/s
    Aug 24 12:42:52.26: [ 3080]: REMOTE wants A4 page width (215 mm)
    Aug 24 12:42:52.26: [ 3080]: REMOTE wants unlimited page length
    Aug 24 12:42:52.26: [ 3080]: REMOTE wants 3.85 line/mm
    Aug 24 12:42:52.26: [ 3080]: REMOTE wants 1-D MH
    Aug 24 12:42:52.26: [ 3080]: RECV training at v.29 9600 bit/s
    Aug 24 12:42:52.26: [ 3080]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
    Aug 24 12:42:52.26: [ 3080]: <-- [10:AT+FRM=96\r]
    Aug 24 12:42:56.76: [ 3080]: --> [0:]
    Aug 24 12:42:56.76: [ 3080]: MODEM <Empty line>
    Aug 24 12:42:56.76: [ 3080]: MODEM TIMEOUT: receiving TCF
    Aug 24 12:42:56.76: [ 3080]: <-- data [1]
    Aug 24 12:42:56.78: [ 3080]: --> [2]
    Aug 24 12:42:56.78: [ 3080]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
    Aug 24 12:42:56.78: [ 3080]: <-- [9:AT+FRS=7\r]
    Aug 24 12:42:56.78: [ 3080]: --> [2]
    Aug 24 12:42:56.78: [ 3080]: <-- [9:AT+FTH=3\r]
    Aug 24 12:42:56.80: [ 3080]: --> [7]
    Aug 24 12:42:56.80: [ 3080]: <-- HDLC<3:FF C8 22>
    Aug 24 12:42:56.80: [ 3080]: <-- data [3]
    Aug 24 12:42:56.80: [ 3080]: <-- data [2]
    Aug 24 12:42:57.98: [ 3080]: --> [2]
    Aug 24 12:42:57.98: [ 3080]: TRAINING failed
    Aug 24 12:42:57.98: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:42:58.18: [ 3080]: --> [7]
    Aug 24 12:42:58.94: [ 3080]: --> HDLC<25:FF C0 C2 8C 4C CC 2C 6C CC CC 04 04 04 04 04 04 04 04 04 04 04 04 04 4C D1>
    Aug 24 12:42:58.94: [ 3080]: --> [2]
    Aug 24 12:42:58.94: [ 3080]: REMOTE TSI "3364321"
    Aug 24 12:42:58.94: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:42:59.28: [ 3080]: --> [7]
    Aug 24 12:42:59.28: [ 3080]: --> HDLC<11:FF C8 C1 00 60 15 01 01 00 0A 70>
    Aug 24 12:42:59.30: [ 3080]: --> [2]
    Aug 24 12:42:59.30: [ 3080]: REMOTE wants 9600 bit/s
    Aug 24 12:42:59.30: [ 3080]: REMOTE wants A4 page width (215 mm)
    Aug 24 12:42:59.30: [ 3080]: REMOTE wants unlimited page length
    Aug 24 12:42:59.30: [ 3080]: REMOTE wants 3.85 line/mm
    Aug 24 12:42:59.30: [ 3080]: REMOTE wants 1-D MH
    Aug 24 12:42:59.30: [ 3080]: RECV training at v.29 9600 bit/s
    Aug 24 12:42:59.30: [ 3080]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
    Aug 24 12:42:59.30: [ 3080]: <-- [10:AT+FRM=96\r]
    Aug 24 12:43:03.80: [ 3080]: --> [0:]
    Aug 24 12:43:03.80: [ 3080]: MODEM <Empty line>
    Aug 24 12:43:03.80: [ 3080]: MODEM TIMEOUT: receiving TCF
    Aug 24 12:43:03.80: [ 3080]: <-- data [1]
    Aug 24 12:43:03.82: [ 3080]: --> [2]
    Aug 24 12:43:03.82: [ 3080]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
    Aug 24 12:43:03.82: [ 3080]: <-- [9:AT+FRS=7\r]
    Aug 24 12:43:03.82: [ 3080]: --> [2]
    Aug 24 12:43:03.82: [ 3080]: <-- [9:AT+FTH=3\r]
    Aug 24 12:43:03.84: [ 3080]: --> [7]
    Aug 24 12:43:03.84: [ 3080]: <-- HDLC<3:FF C8 22>
    Aug 24 12:43:03.84: [ 3080]: <-- data [3]
    Aug 24 12:43:03.84: [ 3080]: <-- data [2]
    Aug 24 12:43:05.02: [ 3080]: --> [2]
    Aug 24 12:43:05.02: [ 3080]: TRAINING failed
    Aug 24 12:43:05.02: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:43:05.20: [ 3080]: --> [7]
    Aug 24 12:43:06.00: [ 3080]: --> HDLC<25:FF C0 C2 8C 4C CC 2C 6C CC CC 04 04 04 04 04 04 04 04 04 04 04 04 04 4C D1>
    Aug 24 12:43:06.00: [ 3080]: --> [2]
    Aug 24 12:43:06.00: [ 3080]: REMOTE TSI "3364321"
    Aug 24 12:43:06.00: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:43:06.32: [ 3080]: --> [7]
    Aug 24 12:43:06.32: [ 3080]: --> HDLC<11:FF C8 C1 00 60 15 01 01 00 0A 70>
    Aug 24 12:43:06.36: [ 3080]: --> [2]
    Aug 24 12:43:06.36: [ 3080]: REMOTE wants 9600 bit/s
    Aug 24 12:43:06.36: [ 3080]: REMOTE wants A4 page width (215 mm)
    Aug 24 12:43:06.36: [ 3080]: REMOTE wants unlimited page length
    Aug 24 12:43:06.36: [ 3080]: REMOTE wants 3.85 line/mm
    Aug 24 12:43:06.36: [ 3080]: REMOTE wants 1-D MH
    Aug 24 12:43:06.36: [ 3080]: RECV training at v.29 9600 bit/s
    Aug 24 12:43:06.36: [ 3080]: MODEM set XON/XOFF/DRAIN: input ignored, output generated
    Aug 24 12:43:06.36: [ 3080]: <-- [10:AT+FRM=96\r]
    Aug 24 12:43:10.86: [ 3080]: --> [0:]
    Aug 24 12:43:10.86: [ 3080]: MODEM <Empty line>
    Aug 24 12:43:10.86: [ 3080]: MODEM TIMEOUT: receiving TCF
    Aug 24 12:43:10.86: [ 3080]: <-- data [1]
    Aug 24 12:43:10.88: [ 3080]: --> [2]
    Aug 24 12:43:10.88: [ 3080]: MODEM set XON/XOFF/DRAIN: input ignored, output disabled
    Aug 24 12:43:10.88: [ 3080]: <-- [9:AT+FRS=7\r]
    Aug 24 12:43:10.88: [ 3080]: --> [2]
    Aug 24 12:43:10.88: [ 3080]: <-- [9:AT+FTH=3\r]
    Aug 24 12:43:10.90: [ 3080]: --> [7]
    Aug 24 12:43:10.90: [ 3080]: <-- HDLC<3:FF C8 22>
    Aug 24 12:43:10.90: [ 3080]: <-- data [3]
    Aug 24 12:43:10.90: [ 3080]: <-- data [2]
    Aug 24 12:43:12.08: [ 3080]: --> [2]
    Aug 24 12:43:12.08: [ 3080]: TRAINING failed
    Aug 24 12:43:12.08: [ 3080]: <-- [9:AT+FRH=3\r]
    Aug 24 12:43:12.26: [ 3080]: --> [7]
    Aug 24 12:43:12.50: [ 3080]: --> HDLC<5:FF C8 DF 59 6F>
    Aug 24 12:43:12.64: [ 3080]: --> [5:ì
     

Share This Page