Problems with Iax connection

Discussion in 'General' started by Tola, Jul 16, 2010.

  1. Tola

    Joined:
    Jul 16, 2010
    Messages:
    77
    Likes Received:
    0
    I have two ipPbx-s they are connected with VPN Cisco routers on each pbx there is iax to another pbx. few days ago my short mobile dialing stoped working, on 1 pbx i have gateways for mobile phones, and 2 pbx dials trough iax connection on that gateways.

    extensions.conf

    dialing local phones
    exten => _21XX,1,Dial(IAX2/dugopolje/${EXTEN},60)
    exten => _21XX,2,Congestion
    exten => _21XX,102,Busy
    dialing mobil phones(not working)
    exten => _2XX,1,Dial(IAX2/dugopolje/${EXTEN},60)
    exten => _2XX,2,Congestion
    exten => _2XX,102,Busy

    on 2 pbx i get this error
    -- Executing [255@from-internal:1] Dial("SIP/3100-096eeb30", "IAX2/dugopolje/255|60") in new stack
    -- Called dugopolje/255
    -- Hungup 'IAX2/dugopolje-16384'
    == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [255@from-internal:2] Congestion("SIP/3100-096eeb30", "") in new stack
    == Spawn extension (from-internal, 255, 2) exited non-zero on 'SIP/3100-096eeb30'
    -- Executing [h@from-internal:1] Macro("SIP/3100-096eeb30", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] GotoIf("SIP/3100-096eeb30", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,4)
    -- Executing [s@macro-hangupcall:4] GotoIf("SIP/3100-096eeb30", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,7)
    -- Executing [s@macro-hangupcall:7] GotoIf("SIP/3100-096eeb30", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] Hangup("SIP/3100-096eeb30", "") in new stack
    == Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/3100-096eeb30' in macro 'hangupcall'
    == Spawn extension (from-internal, s, 1) exited non-zero on 'SIP/3100-096eeb30'

    on 1 pbx i get nothing no trace of calling the gateways.

    please help i am new in this.
     

Share This Page