Problems routing inbound calls

Discussion in 'General' started by medium_grade, Feb 17, 2010.

  1. medium_grade

    Joined:
    Apr 3, 2009
    Messages:
    9
    Likes Received:
    0
    I am running Elastix 1.6-12 and SimpleSignal is my provider.

    I am trying to setup a new PBX with SimpleSignal SIP trunks. I have outbound calls working, but inbound calls simply fail. I have an inbound route setup for any/any, but when I try to place an inbound call, SimpleSignal tells me that they see the call all the way through to the PBX and the PBX informs them that it could not route the call. The only message I see on the Asterisk logs is this:

    Code:
    Call from 'MAINDID' to extension 'MAINDID' rejected because extension not found.
    Where "MAINDID" is the actual number I am trying to call. It is listed as both the "from" as well as the "extension." If I try to call a different DID, it will give me the same message only replacing the "extension" with the DID I actually called. This seems odd, but what is even more odd is the fact that all of these patterns should be matched by my any/any inbound route. Can someone please shed some light on this issue?

    Thanks!
     
  2. medium_grade

    Joined:
    Apr 3, 2009
    Messages:
    9
    Likes Received:
    0
    Solved. Simply added "context=from-trunk" in the PEER details.
     

Share This Page