Problemas con E1 Telmex

rramos2k

Joined
Nov 11, 2009
Messages
6
Likes
0
Points
0
#1
Tengo una tarjeta sangoma a102de con elastix 1.6,

ya configure el wanpipe, dahdi y asterisk, pero trato de marcar a cualquier numero y no me da tono este es mi log de la llamada, ya tengo los canales como IDLE, y ya no se donde buscar muchas gracias, al final agrege los archivos de configuracion


-- Executing [s@macro-dialout-trunk:20] Dial("SIP/1182-12da2820", "DAHDI/g1/1723436|300|") in new stack
[Nov 11 16:56:32] NOTICE[11088]: app_dial.c:1185 dial_exec_full: Hey! chan SIP/1182-12da2820's context='macro-dialout-trunk', and exten='s'
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1264 dahdi_r2_get_channel_category: no MFC/R2 category specified for chan DAHDI/1-1, using default National Subscriber
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Attempting to make call (ANI=1182, DNIS=1723436, category=National Subscriber)
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Call started at Wed Nov 11 16:56:32 2009 on chan 1 [openr2 version 1.2.0, revision exported]
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Tx >> [SEIZE] 0x00
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Raw Tx >> 0x01
-- Called g1/1723436
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:4707 dahdi_handle_event: bits changed in chan 1
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Bits changed from 0x08 to 0x0C
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Rx << [SEIZE ACK] 0x0C
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Sending DNIS digit 1
[Nov 11 16:56:32] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - MF Tx >> 1 [ON]
[Nov 11 16:56:35] DEBUG[11088]: chan_dahdi.c:3490 dahdi_hangup: disconnecting MFC/R2 call on chan 1
[Nov 11 16:56:35] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Tx >> [CLEAR FORWARD] 0x08
[Nov 11 16:56:35] DEBUG[11088]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Raw Tx >> 0x09

Estos son los archivos de configuración

wanpipe1.conf

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 12
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CAS
TE_HIGHIMPEDANCE= NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
#TDMV_HW_DTMF = YES
#TDMV_HW_FAX_DETECT = YES
#HWEC_CLKSRC = YES

[w1g1]
ACTIVE_CH = 1-16
TDMV_HWEC = YES
TDMV_ECHO_OFF = YES

/etc/dahdi/system.conf
# Span 2: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3//CRC4
span=1,1,0,cas,hdb3,crc4
cas=1-10:1101
dchan=16
#echocanceller=oslec,1-10

# Global data

loadzone = mx
defaultzone = mx

/etc/asterisk/chan-dahdi.conf
[trunkgroups]

[channels]
context=from-pstn
switchtype=national
signalling=mfcr2
mfcr2_variant=mx
mfcr2_get_ani_first=no
mfcr2_max_ani=10
mfcr2_max_dnis=8
mfcr2_category=national_subscriber
mfcr2_call_files=yes
mfcr2_logdir=span1
mfcr2_logging=all
mfcr2_mfback_timeout=-1
mfcr2_metering_pulse_timeout=-1
group=1
channel => 1-10
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
cid_rxgain=5
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of your analog lines
busydetect=yes
busycount=3
immediate=no
 

abundismty

Joined
Jul 2, 2009
Messages
23
Likes
0
Points
0
#2
si recibes llamadas ?
 

rramos2k

Joined
Nov 11, 2009
Messages
6
Likes
0
Points
0
#3
nop, si me cambia el estatus del canal a SAIZE ACK pero igual no recibo sonido

este es log de una llamada entrante.

[18:27:54:418] [Thread: 1099622720] [Chan 7] - Call started at Wed Nov 11 18:27:54 2009 on chan 7 [openr2 version 1.2.0, revision exported]
[18:27:54:418] [Thread: 1099622720] [Chan 7] - CAS Tx >> [SEIZE ACK] 0x0C
[18:27:54:418] [Thread: 1099622720] [Chan 7] - CAS Raw Tx >> 0x0D
[18:28:01:729] [Thread: 1099622720] [Chan 7] - Bits changed from 0x00 to 0x08
[18:28:01:730] [Thread: 1099622720] [Chan 7] - CAS Rx << [CLEAR FORWARD] 0x08
[18:28:01:730] [Thread: 1099622720] [Chan 7] - Far end disconnected. Reason: Normal Clearing
[18:28:01:730] [Thread: 1099622720] [Chan 7] - Call ended
[18:28:01:730] [Thread: 1099622720] [Chan 7] - Attempting to cancel timer timer 0
[18:28:01:730] [Thread: 1099622720] [Chan 7] - Cannot cancel timer 0

GRACIAS
 

abundismty

Joined
Jul 2, 2009
Messages
23
Likes
0
Points
0
#4
en /etc/asterisk/chan-dahdi.conf

tienes una line que esta asi

mfcr2_max_dnis=8
cambia el 8 por un 4
mfcr2_max_dnis=4
 

abundismty

Joined
Jul 2, 2009
Messages
23
Likes
0
Points
0
#5
y el contexto ponlo como from-zaptel
 

rramos2k

Joined
Nov 11, 2009
Messages
6
Likes
0
Points
0
#6
ya cambie el contexo a zaptel y cambie el parametro a mfcr2_max_dnis=8,lamentablemente sigo sin oir ninguna voz cuando trato de marcar a cualquier numero

voip*CLI> dahdi show channels
Chan Extension Context Language MOH Interpret
pseudo default default
1 from-zaptel es default
2 from-zaptel es default
3 from-zaptel es default
4 from-zaptel es default
5 from-zaptel es default
6 from-zaptel es default
7 from-zaptel es default
8 from-zaptel es default
9 from-zaptel es default
10 from-zaptel es default

voip*CLI> mfcr2 show channels
Chan Variant Max ANI Max DNIS ANI First Immediate Accept Tx CAS Rx CAS
1 MX 10 4 No No IDLE IDLE
2 MX 10 4 No No IDLE IDLE
3 MX 10 4 No No IDLE IDLE
4 MX 10 4 No No IDLE IDLE
5 MX 10 4 No No IDLE IDLE
6 MX 10 4 No No IDLE IDLE
7 MX 10 4 No No IDLE IDLE
8 MX 10 4 No No IDLE IDLE
9 MX 10 4 No No IDLE IDLE
10 MX 10 4 No No IDLE IDLE

[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1264 dahdi_r2_get_channel_category: no MFC/R2 category specified for chan DAHDI/1-1, using default National Subscriber
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Attempting to make call (ANI=1182, DNIS=1723436, category=National Subscriber)
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Call started at Thu Nov 12 13:35:55 2009 on chan 1 [openr2 version 1.2.0, revision exported]
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Tx >> [SEIZE] 0x00
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Raw Tx >> 0x01 -- Called g1/1723436
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:4707 dahdi_handle_event: bits changed in chan 1
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Bits changed from 0x08 to 0x0C
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Rx << [SEIZE ACK] 0x0C
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Sending DNIS digit 1
[Nov 12 13:35:55] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - MF Tx >> 1 [ON]
[Nov 12 13:41:11] DEBUG[4041]: chan_dahdi.c:3490 dahdi_hangup: disconnecting MFC/R2 call on chan 1
[Nov 12 13:41:11] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Tx >> [CLEAR FORWARD] 0x08
[Nov 12 13:41:11] DEBUG[4041]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Raw Tx >> 0x09
[Nov 12 13:41:11] DEBUG[3987]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Bits changed from 0x0C to 0x08
[Nov 12 13:41:11] DEBUG[3987]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Rx << [IDLE] 0x08
[Nov 12 13:41:11] DEBUG[3987]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - Call ended
[Nov 12 13:41:11] DEBUG[3987]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Tx >> [IDLE] 0x08
[Nov 12 13:41:11] DEBUG[3987]: chan_dahdi.c:1533 dahdi_r2_write_log: Chan 1 - CAS Raw Tx >> 0x09
[Nov 12 13:41:11] NOTICE[3987]: chan_dahdi.c:1388 dahdi_r2_on_call_end: MFC/R2 call end on chan 1
 

rramos2k

Joined
Nov 11, 2009
Messages
6
Likes
0
Points
0
#7
Despues de estar haciedo pruebas marcando a diferentes numeros de telefono me marco este error.

[Nov 12 18:49:27] DEBUG[3971] chan_dahdi.c: Chan 1 - MF Rx << F [ON]
[Nov 12 18:49:27] DEBUG[3971] chan_dahdi.c: Chan 1 - MF Tx >> 1 [OFF]
[Nov 12 18:49:27] DEBUG[3971] chan_dahdi.c: Chan 1 - MF Rx << F [OFF]
[Nov 12 18:49:27] ERROR[3971] chan_dahdi.c: Chan 1 - Protocol error. Reason = Invalid Multi Frequency Tone, R2 State = Seize ACK Received, MF state = DNIS Digit Transmitted, MF Group = Forward Group I, CAS = 0x0C
DNIS = 1723435, ANI = 1184, MF = 0x46
[Nov 12 18:49:27] DEBUG[3971] chan_dahdi.c: Chan 1 - CAS Tx >> [IDLE] 0x08
[Nov 12 18:49:27] DEBUG[3971] chan_dahdi.c: Chan 1 - CAS Raw Tx >> 0x09
[Nov 12 18:49:27] ERROR[3971] chan_dahdi.c: MFC/R2 protocol error on chan 1: Invalid Multi Frequency Tone
[Nov 12 18:49:27] DEBUG[3971] chan_dahdi.c: disconnecting MFC/R2 call on chan 1
[Nov 12 18:49:27] ERROR[3971] chan_dahdi.c: Chan 1 - Cannot disconnect call when we dont have a call to disconnect
[Nov 12 18:49:27] VERBOSE[3971] logger.c: -- Hungup 'DAHDI/1-1'
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,915
Messages
130,920
Members
17,595
Latest member
feparra121
Top