Problem with ring all strategy

Discussion in 'General' started by gemos, Oct 6, 2009.

  1. gemos

    Joined:
    Jan 17, 2008
    Messages:
    1
    Likes Received:
    0
    Hi all
    I've istalled Elastix with all updates (1.5.2-2.3 with Asterisk 1.4.26.1).

    I have done a ring group that it has 3 external phones. So I put them to the ring-groups list of the free-pbx page:
    280000000#
    281111111#
    282222222#
    I choose the ringall strategy.
    My problem is that when I call the ring-group, it only rings the first phone, and NOt the others.
    I have 6 fxo cards:
    [root@pbx ~]# /etc/init.d/dahdi status
    ### Span 1: WCFXO/0 "Wildcard X100P Board 1" (MASTER)
    1 FXO FXSKS (In use) (SWEC: OSLEC) (battery)
    ### Span 2: WCFXO/1 "Wildcard X100P Board 2"
    2 FXO FXSKS (In use) (SWEC: OSLEC) (battery)
    ### Span 3: WCTDM/4 "Wildcard TDM400P REV I Board 5"
    3 FXO FXSKS (In use) (SWEC: OSLEC)
    4 FXO FXSKS (In use) (SWEC: OSLEC)
    5 FXO FXSKS (In use) (SWEC: OSLEC)
    6 FXO FXSKS (In use) (SWEC: OSLEC)

    when I call the ring group, and simultanusly execute the "/etc/init.d/dahdi status" command (many times), I see for one second that the asterisk opens three channels (4, 5, 6):
    4 FXO FXSKS (In use) (SWEC: OSLEC) (EC: OSLEC)
    5 FXO FXSKS (In use) (SWEC: OSLEC) (EC: OSLEC)
    6 FXO FXSKS (In use) (SWEC: OSLEC) (EC: OSLEC)
    and then it closes two of them (5, 6)
    4 FXO FXSKS (In use) (SWEC: OSLEC) (EC: OSLEC)
    5 FXO FXSKS (In use) (SWEC: OSLEC)
    6 FXO FXSKS (In use) (SWEC: OSLEC)

    When I call the numbers seperatelly all works ok.

    What is the solution to this?
    Thanks, and sorry for my english.
     
  2. Chilling_Silence

    Joined:
    Sep 23, 2008
    Messages:
    488
    Likes Received:
    0
    What happens if you use a "round-robin" style ring group so it rings one, then the next, then the next .. ?
     

Share This Page