Problem with Audiocodes FXO

otavioacosta

Joined
Oct 3, 2008
Messages
4
Likes
0
Points
0
#1
Recently set up the Elastix and the turnouts are working perfectly. For external links'm using a Gateway FXO AUDIOCODES of the 4-door (MP114). But I try to make external links, does not work. Enabled the sip debug panel of the asterisk and found the following message: "Executing [s-CHANUNAVAIL @ macro-dialout-trunk: 3] noop (" SIP/1001-09457530 "," TRUNK Dial failed due to CHANUNAVAIL - through failing to other trunks; ") in new stack" this is an error message? I also noticed that not enough of anything in the log FXO.
Thanks!
 

otavioacosta

Joined
Oct 3, 2008
Messages
4
Likes
0
Points
0
#2
The problem was in the "alow" and "disalow" Peer Details on the trunk created.
Before was:
"allow = ulaw
call-limit = 50
canreinvite = No
context = from-atrium
fromdomain = 192.168.0.3
disallow = all
fromuser = trunkatrium ....."

I had to put the "disallow" before the "allow"
"disallow = all
allow = ulaw
call-limit = 50
canreinvite = No
context = from-atrium
fromdomain = 192.168.0.3
fromuser = trunkatrium ........"

And is working perfectly.
 

danardf

Joined
Dec 3, 2007
Messages
8,069
Likes
10
Points
88
#3
Strange!

Because normally freepbx put automatically disallow=all before allow! :huh:
Maybe you have configured your trunk manually without freepbx?
 

otavioacosta

Joined
Oct 3, 2008
Messages
4
Likes
0
Points
0
#4
if I am not mistaken, yes, set up manually.

But now I'm having another problem with the FXO.
I am trying to send fax and FXO returns the following error message so that when I sign the fax

2d: 22h: 44m: 32s (lgr_psbrdex) (134,392) recv <- EV_END_FAX Ch: 0 FAIL Answering Relay (T.38) Pages: 5 Modltn: 0 Errors: 0

Can anyone give me an idea?
 

jgutierrez

Joined
Feb 28, 2008
Messages
5,737
Likes
0
Points
0
#5
have you tried setting up the fax mode into "voice and fax pass through"?

Also what is the codec compression? try ulaw
 

Telco

Joined
Oct 4, 2007
Messages
275
Likes
0
Points
0
#6
otavioacosta, can you post your setup for the mp114. I have mine working on inbound (without caller id) I would like caller id to work. And I can not get it to work outbound. I have another system that it is working on and I have duplicated both the mp114 and the trunk settings but it still does not work.

For caller id on inbound all I get is a 2. That is it.

Any Help would be greatly appreciated.

T
 

jcasaravilla

Joined
Aug 4, 2008
Messages
55
Likes
0
Points
0
#7
Re: Re:problem with Audiocodes FXO

iam working in a new instalation with mp114 fxo , iam making some tests unsucefull at the moment , y hope make working it today , any help is welcome !

regards
 

jcasaravilla

Joined
Aug 4, 2008
Messages
55
Likes
0
Points
0
#8
Re: Re:problem with Audiocodes FXO

this gw work fine to me in Uruguay
 

fmvillares

Joined
Sep 8, 2007
Messages
1,785
Likes
0
Points
0
#9
Re: Re:problem with Audiocodes FXO

this is the rolls royce of gw and is very difficult to configure, even for experts...and not a case for explain here because it would take pages to finish a complete working config as the actual tutorials in google show.
 

jcasaravilla

Joined
Aug 4, 2008
Messages
55
Likes
0
Points
0
#10
De acuerdo con Villares , son unos fierros estos equipos , me llevo casi 3 dias
hacerlos levantar para que me funcionara todo correctamente con asterisk.

Saludos
 

manzurek

Joined
Jun 22, 2007
Messages
194
Likes
0
Points
0
#11
Hola jcasaravilla, me podrias ayudar con un MP-114 FXO, ya llevo varios dias y no logro hacerlos funcionar

Saludos,
 

jcasaravilla

Joined
Aug 4, 2008
Messages
55
Likes
0
Points
0
#12
OK , pasame mas detalles de tu escenario. ( pais , instalacion , etc )

Saludos
 

manzurek

Joined
Jun 22, 2007
Messages
194
Likes
0
Points
0
#13
Hola te paso los datos que tengo, Audiocodes MP-114 de 4 puertos FXO
En mi asterisk+freePBX
Trunk SIP
type=friend
context=from-trunk
host=10.26.13.17 (IP del AudioCodes)
username=manzurek
secret=12345678
dtmfmode=rfc2833
disallow=all
allow=ulaw
canreinvite=no

En el audiocodes

;**************
;** Ini File **
;**************

;Board: MP-114 FXO
;Serial Number: 3037983
;Slot Number: 1
;Software Version: 5.80A.023.006
;DSP Software Version: 204IM => 580.05
;Board IP Address: 10.26.13.17
;Board Subnet Mask: 255.0.0.0
;Board Default Gateway: 10.26.13.253
;Ram size: 32M Flash size: 8M
;Num of DSP Cores: 1 Num DSP Channels: 4
;Profile: NONE
;-----------------------------------------


[SYSTEM Params]

DNSPriServerIP = 200.48.225.130
DNSSecServerIP = 200.48.225.146
VXMLFIleName = ''
NTPServerIP = 10.26.13.10
NTPServerUTCOffset = -18000
SSHServerEnable = 1

[BSP Params]

PCMLawSelect = 3
BaseUDPPort = 15000
VLANMODE = 0

[Analog Params]

FXSLoopCharacteristicsFilename = 'MP11x-02-1-FXS_16KHZ.dat'

[ControlProtocols Params]

AdminStateLockControl = 0
cpPlayCoder = 'PCMU'
cpRecordCoder = 'PCMU'

[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0

[Voice Engine Params]

CallProgressTonesFilename = 'usa_tones_13.dat'
FaxModemBypassCoderType = 1
RFC2833TxPayloadType = 101
RFC2833RxPayloadType = 101
DTMFDetectorSensitivity = 1

[WEB Params]

LogoWidth = '145'

[SIP Params]

MAXDIGITS = 11
ALWAYSUSEROUTETABLE = 0
REMOVEPREFIX = 0
REGISTRATIONTIME = 3600
USERADLOG = 1
ISPROXYUSED = 1
ISREGISTERNEEDED = 1
AUTHENTICATIONMODE = 1
ADDTRUNKGROUPASPREFIX = 0
ISTWOSTAGEDIAL = 0
ENABLEREVERSALPOLARITY = 1
RADDEBLEVEL = 2
CHANNELSELECTMODE = 2
RADLOGOUTPUT = 1
GWDEBUGLEVEL = 6
ISUSERPHONE = 1
DEFAULTNUMBER = ''
PROXYNAME = '10.26.13.10'
REGISTRARIP = '10.26.13.10:5060' (IP del Asterisk)
SIPGATEWAYNAME = '10.26.13.17'
USERNAME = 'manzurek'
CNONCE = ''
PASSWORD = '12345678'
ALWAYSSENDTOPROXY = 1
ADDPORTASPREFIX = 0
PROXYREDUNDANCYMODE = 1
ALTROUTINGTEL2IPENABLE = 1
USEGATEWAYNAMEFOROPTIONS = 1
ISUSERPHONEINFROM = 0
SUBSCRIPTIONMODE = 1
SIPTRANSPORTTYPE = 0
GWREGISTRATIONNAME = '10.26.13.17'
RINGSBEFORECALLERID = 0
REGISTRARTRANSPORTTYPE = 0
SOURCEIPADDRESSINPUT = 0
SOURCEMANIPULATIONMODE = 0

[IPsec Params]


[SNMP Params]


;
; *** TABLE DspTemplates ***
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts
;

;
; *** TABLE PREFIX ***
;
;

[ PREFIX ]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix, PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix, PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix, PREFIX_TransportType, PREFIX_SrcTrunkGroupID;
PREFIX 0 = *, 10.26.13.10, *, 1, 255, 5060, -1, , -1, , 0, -1;

[ \PREFIX ]

;
; *** TABLE CoderName ***
;
;

[ CoderName ]
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval, CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 0 = g711Ulaw64k, 20, 0, 255, 0;

[ \CoderName ]

;
; *** TABLE TrunkGroup ***
;
;

[ TrunkGroup ]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 1, 255, 1, 1, 995752385, 0, 255, 255;

[ \TrunkGroup ]

;
; *** TABLE PstnPrefix ***
;
;

[ PstnPrefix ]
FORMAT PstnPrefix_Index = PstnPrefix_DestPrefix, PstnPrefix_TrunkGroupId, PstnPrefix_SourcePrefix, PstnPrefix_SourceAddress, PstnPrefix_ProfileId, PstnPrefix_SrcIPGroupID, PstnPrefix_DestHostPrefix, PstnPrefix_SrcHostPrefix;
PstnPrefix 0 = *, 1, *, 10.26.13.10, 0, -1, *, *;

[ \PstnPrefix ]

;
; *** TABLE ProxyIp ***
;
;

[ ProxyIp ]
; ** NOTE: Changes were made to active configuration.
; ** The data below is different from current values.
FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType, ProxyIp_ProxySetId;
ProxyIp 0 = 10.26.13.10:5060, 0, 0;

[ \ProxyIp ]

;
; *** TABLE TxDtmfOption ***
;
;

[ TxDtmfOption ]
FORMAT TxDtmfOption_Index = TxDtmfOption_Type;
TxDtmfOption 0 = 4;

[ \TxDtmfOption ]

;
; *** TABLE TrunkGroupSettings ***
;
;

[ TrunkGroupSettings ]
FORMAT TrunkGroupSettings_Index = TrunkGroupSettings_TrunkGroupId, TrunkGroupSettings_ChannelSelectMode, TrunkGroupSettings_RegistrationMode, TrunkGroupSettings_GatewayName, TrunkGroupSettings_ContactUser, TrunkGroupSettings_ServingIPGroup;
TrunkGroupSettings 0 = 1, 2, 1, 10.26.13.17, , -1;

[ \TrunkGroupSettings ]

;
; *** TABLE IpProfile ***
;
;

[ IpProfile ]
FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference, IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay, IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ, IpProfile_SCE, IpProfile_RTPRedundancyDepth, IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode, IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed, IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia, IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller, IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour, IpProfile_CallLimit, IpProfile_DisconnectOnBrokenConnection, IpProfile_FirstTxDtmfOption, IpProfile_SecondTxDtmfOption, IpProfile_RxDTMFOption, IpProfile_EnableHold, IpProfile_InputGain, IpProfile_VoiceVolume, IpProfile_AddIEInSetup, IpProfile_SBCExtensionCodersGroupID, IpProfile_MediaIPVersionPreference, IpProfile_TranscodingMode;
IpProfile 1 = , 1, 0, 0, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 0, 0, -1, 1, 0, 0, -1, 1, 4, 0, 1, 1, 0, 0, , -1, 0, 0;

[ \IpProfile ]

;
; *** TABLE TargetOfChannel ***
;
;

[ TargetOfChannel ]
FORMAT TargetOfChannel_Index = TargetOfChannel_Destination, TargetOfChannel_Type;
TargetOfChannel 0 = 1040, 1;

[ \TargetOfChannel ]

;
; *** TABLE ProxySet ***
;
;

[ ProxySet ]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive, ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod, ProxySet_IsProxyHotSwap, ProxySet_SRD;
ProxySet 0 = 1, 60, 0, 0, 0;

[ \ProxySet ]

;
; *** TABLE InterfaceTable ***
;
;

[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes, InterfaceTable_InterfaceMode, InterfaceTable_IPAddress, InterfaceTable_PrefixLength, InterfaceTable_Gateway, InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0 = 6, 10, 10.26.13.17, 8, 10.26.13.253, 1, O+M+C;

[ \InterfaceTable ]


Nunca logro que se registre como Gateway
Mi correo es manzurek@hotmail.com, agradecere cualquier ayuda que me puedas brindar

Saludos,
 

manzurek

Joined
Jun 22, 2007
Messages
194
Likes
0
Points
0
#14
Re: Re:problem with Audiocodes FXO

Bueno, ya logre un avance, puedo realizar y recibir llamadas, pero solo tengo audio en un sentido, es decir que la persona que esta en el anexo del asterisk si me escucha, pero yo no escucho nada, da igual si yo lo llamo o el me llama, nunca lo escucho.

Hasta ahora no doy con el problema, estuve viendo los parametros de RTP Base UDP Port y lo puse en 12000 (por default estaba en 6000, en mi asterisk tengo el rango de 10000 - 20000) pero sigue igual

Agradecere cualquier ayuda que me puedan brindar

Saludos,
 

rafael

Joined
May 14, 2007
Messages
1,454
Likes
1
Points
0
#15
Re: Re:problem with Audiocodes FXO

Pues yo también ando con problemas con este gw. Puedo hacer llamadas entrantes, pero no puedo sacar llamadas. Todo me bussy.

En lo personal estoy tratando de configurar una troncal por puerto para manejar la lógica desde Elastix. Las troncales se registran ok.

Ahora cuando quiero sacar llamadas me da all circuit are bussy.

Este es mi archivo .ini
Code:
;**************
;** Ini File **
;**************

;Board: MP-114 FXO
;Serial Number: 3308242
;Slot Number: 1
;Software Version: 5.80A.023.006
;DSP Software Version: 204IM => 580.05
;Board IP Address: 192.168.200.223
;Board Subnet Mask: 255.255.0.0
;Board Default Gateway: 192.168.200.222
;Ram size: 32M   Flash size: 8M 
;Num of DSP Cores: 1  Num DSP Channels: 4
;Profile: NONE 
;-----------------------------------------


[SYSTEM Params]

DNSPriServerIP = 0.0.0.0
DNSSecServerIP = 0.0.0.0
NTPServerIP = 192.168.200.222
NTPServerUTCOffset = -18000
NTPUpdateInterval = 86400

[BSP Params]

PCMLawSelect = 3

[Analog Params]
PolarityReversalType = 1
MinFlashHookTime = 100
CurrentDisconnectDuration = 200
FXSLoopCharacteristicsFilename = 'MP11x-02-1-FXS_16KHZ.dat'

[ControlProtocols Params]


[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0

[Voice Engine Params]

CallProgressTonesFilename = 'usa_tones_13.dat'
IdlePCMPattern = 85
DTMFDetectorSensitivity = 1

[WEB Params]

LogoWidth = '145'

[SIP Params]

REGISTRATIONTIME = 70
ISPROXYUSED = 1
ISREGISTERNEEDED = 1
AUTHENTICATIONMODE = 0
ISWAITFORDIALTONE = 1
ISTWOSTAGEDIAL = 0
SIPGATEWAYNAME = '192.168.200.222'
ISFALLBACKUSED = 1
GWREGISTRATIONNAME = '192.168.200.222'
DISCONNECTONDIALTONE = 1

[IPsec Params]


[SNMP Params]


;
;  *** TABLE DspTemplates *** 
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts 
;

;
;  *** TABLE CoderName *** 
;  
;

[ CoderName ]
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval, CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 0 = g711Ulaw64k, 20, 0, 255, 1;
CoderName 1 = g711Alaw64k, 20, 0, 255, 1;

[ \CoderName ]

;
;  *** TABLE TrunkGroup *** 
;  
;

[ TrunkGroup ]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 0, 255, 1, 1, fxo1, 0, 255, 255;
TrunkGroup 1 = 0, 255, 2, 2, fxo2, 0, 255, 255;
TrunkGroup 2 = 0, 255, 3, 3, fxo3, 0, 255, 255;
TrunkGroup 3 = 0, 255, 4, 4, fxo4, 0, 255, 255;

[ \TrunkGroup ]

;
;  *** TABLE ProxyIp *** 
;  
;

[ ProxyIp ]
FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType, ProxyIp_ProxySetId;
ProxyIp 0 = 192.168.200.222, -1, 0;

[ \ProxyIp ]

;
;  *** TABLE EnableCallerId *** 
;  
;

[ EnableCallerId ]
FORMAT EnableCallerId_Index = EnableCallerId_IsEnabled;
EnableCallerId 0 = 1;
EnableCallerId 1 = 1;
EnableCallerId 2 = 1;
EnableCallerId 3 = 1;

[ \EnableCallerId ]

;
;  *** TABLE CallerDisplayInfo *** 
;  
;

[ CallerDisplayInfo ]
FORMAT CallerDisplayInfo_Index = CallerDisplayInfo_DisplayString, CallerDisplayInfo_IsCidRestricted;
CallerDisplayInfo 0 = "linea 1", 0;
CallerDisplayInfo 1 = "linea 2", 0;
CallerDisplayInfo 2 = "linea 3", 0;
CallerDisplayInfo 3 = "linea 4", 0;

[ \CallerDisplayInfo ]

;
;  *** TABLE TargetOfChannel *** 
;  
;

[ TargetOfChannel ]
FORMAT TargetOfChannel_Index = TargetOfChannel_Destination, TargetOfChannel_Type;
TargetOfChannel 0 = 5001, 1;
TargetOfChannel 1 = 5002, 1;
TargetOfChannel 2 = 5003, 1;
TargetOfChannel 3 = 5004, 1;

[ \TargetOfChannel ]

;
;  *** TABLE Authentication *** 
;  
;

[ Authentication ]
FORMAT Authentication_Index = Authentication_UserId, Authentication_UserPassword;
Authentication 0 = fxo1, clave1;
Authentication 1 = fxo2, clave2;
Authentication 2 = fxo3, clave3;
Authentication 3 = fxo4, clave4;

[ \Authentication ]

;
;  *** TABLE ProxySet *** 
;  
;

[ ProxySet ]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive, ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod, ProxySet_IsProxyHotSwap, ProxySet_SRD;
ProxySet 0 = 0, 60, 0, 0, 0;

[ \ProxySet ]
Las troncales las defino así:
Code:
[fxo1]
context=from-trunk
host=dynamic
secret=clave01
type=friend
dtmfmode=rfc2833
qualify=yes
 

manzurek

Joined
Jun 22, 2007
Messages
194
Likes
0
Points
0
#16
Re: Re:problem with Audiocodes FXO

Al fin logre configurarlo :cheer: , llamadas entrantes y salientes funcionando perfectamente ;) con la reversion de polaridad activado para el tema de tarificacion.

Para que otros no tengan el mismo problema que yo con este equipo, he copiado toda la configuracion en el sigiente link:

AudiCodes

Saludos,

;**************
;** Ini File **
;**************

;Board: MP-114 FXO
;Serial Number: 3037983
;Slot Number: 1
;Software Version: 5.80A.023.006
;DSP Software Version: 204IM => 580.05
;Board IP Address: 192.168.1.222
;Board Subnet Mask: 255.0.0.0
;Board Default Gateway: 192.168.1.1
;Ram size: 32M Flash size: 8M
;Num of DSP Cores: 1 Num DSP Channels: 4
;Profile: NONE
;-----------------------------------------


[SYSTEM Params]

DNSPriServerIP = 200.48.225.130
DNSSecServerIP = 200.48.225.146
VXMLFIleName = ''
NTPServerIP = 192.168.1.200
NTPServerUTCOffset = -18000
SSHServerEnable = 1

[BSP Params]

PCMLawSelect = 3
BaseUDPPort = 17000

[Analog Params]

FXSLoopCharacteristicsFilename = 'MP11x-02-1-FXS_16KHZ.dat'

[ControlProtocols Params]

AdminStateLockControl = 0
cpPlayCoder = 'PCMU'
cpRecordCoder = 'PCMU'

[MGCP Params]


[MEGACO Params]

EP_Num_0 = 0
EP_Num_1 = 1
EP_Num_2 = 0
EP_Num_3 = 0
EP_Num_4 = 0

[Voice Engine Params]

CallProgressTonesFilename = 'usa_tones_13.dat'
FaxModemBypassCoderType = 1
RFC2833TxPayloadType = 101
RFC2833RxPayloadType = 101
DTMFDetectorSensitivity = 1

[WEB Params]

LogoWidth = '145'

[SIP Params]

MAXDIGITS = 11
REGISTRATIONTIME = 3600
USERADLOG = 1
DISCONNECTONBUSYTONE = 0
ISPROXYUSED = 1
ISREGISTERNEEDED = 1
AUTHENTICATIONMODE = 1
ISTWOSTAGEDIAL = 0
ENABLECURRENTDISCONNECT = 1
ENABLEREVERSALPOLARITY = 1
RADDEBLEVEL = 2
CHANNELSELECTMODE = 2
RADLOGOUTPUT = 1
GWDEBUGLEVEL = 6
ENABLEEARLYMEDIA = 1
DEFAULTNUMBER = ''
PROXYNAME = '192.168.1.200'
REGISTRARIP = '192.168.1.200:5060'
SIPGATEWAYNAME = '192.168.1.222'
CNONCE = ''
PASSWORD = ''
PROXYREDUNDANCYMODE = 1
USEGATEWAYNAMEFOROPTIONS = 1
SUBSCRIPTIONMODE = 1
GWREGISTRATIONNAME = '192.168.1.222'
REGISTRARNAME = '192.168.1.200'
RINGSBEFORECALLERID = 0
REGISTRARTRANSPORTTYPE = 0
SOURCEIPADDRESSINPUT = 0

[IPsec Params]


[SNMP Params]


;
; *** TABLE DspTemplates ***
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts
;

;
; *** TABLE PREFIX ***
;
;

[ PREFIX ]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix, PREFIX_DestAddress, PREFIX_SourcePrefix, PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort, PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix, PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix, PREFIX_TransportType, PREFIX_SrcTrunkGroupID;
PREFIX 0 = *, 192.168.1.200, *, 1, 255, 5060, -1, , 1, , 0, -1;

[ \PREFIX ]

;
; *** TABLE CoderName ***
;
;

[ CoderName ]
FORMAT CoderName_Index = CoderName_Type, CoderName_PacketInterval, CoderName_rate, CoderName_PayloadType, CoderName_Sce;
CoderName 0 = g711Ulaw64k, 20, 0, 255, 0;

[ \CoderName ]

;
; *** TABLE TrunkGroup ***
;
;

[ TrunkGroup ]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum, TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId, TrunkGroup_LastTrunkId, TrunkGroup_Module;
TrunkGroup 0 = 1, 255, 1, 1, 4710857, 0, 255, 255;

[ \TrunkGroup ]

;
; *** TABLE PstnPrefix ***
;
;

[ PstnPrefix ]
FORMAT PstnPrefix_Index = PstnPrefix_DestPrefix, PstnPrefix_TrunkGroupId, PstnPrefix_SourcePrefix, PstnPrefix_SourceAddress, PstnPrefix_ProfileId, PstnPrefix_SrcIPGroupID, PstnPrefix_DestHostPrefix, PstnPrefix_SrcHostPrefix;
PstnPrefix 0 = *, 1, *, 192.168.1.200, 0, -1, *, *;

[ \PstnPrefix ]

;
; *** TABLE ProxyIp ***
;
;

[ ProxyIp ]
FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType, ProxyIp_ProxySetId;
ProxyIp 0 = 192.168.1.200:5060, 0, 0;

[ \ProxyIp ]

;
; *** TABLE TxDtmfOption ***
;
;

[ TxDtmfOption ]
FORMAT TxDtmfOption_Index = TxDtmfOption_Type;
TxDtmfOption 0 = 4;

[ \TxDtmfOption ]

;
; *** TABLE TrunkGroupSettings ***
;
;

[ TrunkGroupSettings ]
FORMAT TrunkGroupSettings_Index = TrunkGroupSettings_TrunkGroupId, TrunkGroupSettings_ChannelSelectMode, TrunkGroupSettings_RegistrationMode, TrunkGroupSettings_GatewayName, TrunkGroupSettings_ContactUser, TrunkGroupSettings_ServingIPGroup;
TrunkGroupSettings 0 = 1, 2, 1, 192.168.1.222, , 1;

[ \TrunkGroupSettings ]

;
; *** TABLE IpProfile ***
;
;

[ IpProfile ]
FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference, IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay, IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ, IpProfile_SCE, IpProfile_RTPRedundancyDepth, IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode, IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed, IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia, IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller, IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour, IpProfile_CallLimit, IpProfile_DisconnectOnBrokenConnection, IpProfile_FirstTxDtmfOption, IpProfile_SecondTxDtmfOption, IpProfile_RxDTMFOption, IpProfile_EnableHold, IpProfile_InputGain, IpProfile_VoiceVolume, IpProfile_AddIEInSetup, IpProfile_SBCExtensionCodersGroupID, IpProfile_MediaIPVersionPreference, IpProfile_TranscodingMode;
IpProfile 1 = , 1, 0, 0, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 0, 0, -1, 1, 0, 0, -1, 1, 4, 0, 1, 1, 0, 0, , -1, 0, 0;

[ \IpProfile ]

;
; *** TABLE EnableCallerId ***
;
;

[ EnableCallerId ]
FORMAT EnableCallerId_Index = EnableCallerId_IsEnabled;
EnableCallerId 0 = 1;
EnableCallerId 1 = 1;
EnableCallerId 2 = 1;
EnableCallerId 3 = 1;

[ \EnableCallerId ]

;
; *** TABLE CallerDisplayInfo ***
;
;

[ CallerDisplayInfo ]
FORMAT CallerDisplayInfo_Index = CallerDisplayInfo_DisplayString, CallerDisplayInfo_IsCidRestricted;
CallerDisplayInfo 0 = 995752385, 0;

[ \CallerDisplayInfo ]

;
; *** TABLE TargetOfChannel ***
;
;

[ TargetOfChannel ]
FORMAT TargetOfChannel_Index = TargetOfChannel_Destination, TargetOfChannel_Type;
TargetOfChannel 0 = 1000, 1;

[ \TargetOfChannel ]

;
; *** TABLE ProxySet ***
;
;

[ ProxySet ]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive, ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod, ProxySet_IsProxyHotSwap, ProxySet_SRD;
ProxySet 0 = 1, 60, 0, 0, 0;

[ \ProxySet ]

;
; *** TABLE InterfaceTable ***
;
;

[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes, InterfaceTable_InterfaceMode, InterfaceTable_IPAddress, InterfaceTable_PrefixLength, InterfaceTable_Gateway, InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0 = 6, 10, 192.168.1.222, 8, 192.168.1.1, 1, O+M+C;

[ \InterfaceTable ]


 

zerocool0984

Joined
Nov 17, 2010
Messages
2
Likes
0
Points
0
#17
jcasaravilla escribió:
De acuerdo con Villares , son unos fierros estos equipos , me llevo casi 3 dias
hacerlos levantar para que me funcionara todo correctamente con asterisk.

Saludos
Compañero me podes regalar una copia de manual o el back de como fue la configuracion de ese GW he buscado en todas parte y no he logrado poder configurarlo

gracias

Zerocool984@hotmail.com
 

asneider

Joined
Feb 7, 2009
Messages
160
Likes
0
Points
0
#18
buenos dias

amigos tengo un audiocodes 118 puedo hacer llamadas salientes pero no entrantes alguien me puede hechar una mano llevo un par de semanas tratando de solucionar con una pista de mi amigo fmvillares pero no logro pillarlo

gracias por lo que me puedan ayudar
 

gerardoerl

Joined
Oct 6, 2011
Messages
1
Likes
0
Points
0
#19
Hola amigos, soy de Uruguay, tengo un audiocodecs mp -114 / 4fxo / 3ac
logre que se interconectara con mi pbx, recibe y saca llamadas, le andan bien los dtmf, anda bien el audio en ambos sentidos, el problema que tengo es que no corta la llamada en ningún sentido. Queda haciendo el sonido de corte "tu tu ... tu tu" por unos 30 segundos, luego en silencio por otros 30 segundos.
Si alguien me puede ayudar, gracias.
mi correo es gerardoerl@estenbro.com
 

kikoforever

Joined
Apr 17, 2013
Messages
7
Likes
0
Points
0
#20
hola a todos tengo el mismo equipo de ustedes y estoy intentando ponerlo a funcionar. el unico problema que tengo por el momento es que lo que tengo es Elastix en ves de Asterix. Alguien me puede decir si es lo mismo y no tendre problema con el funcionamiento, igual lo tengo montado en una maquina virtual. bueno espero sus recomendaciones. gracias
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,566
Latest member
Fpino
Top