problem video

Discussion in 'General' started by soumaya, Jul 19, 2008.

  1. soumaya

    Joined:
    Jul 15, 2008
    Messages:
    4
    Likes Received:
    0
    hi,
    i not have a communication video with elastix 1.1-6 and i use eyebeam softphone
     
  2. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    ok.

    In each extension that use the video, you must have include one or more video codecs.(h261 h263)
    in same time, you must enabled the video option, in sip.conf:

    [general]
    videosupport=yes


    h264 and more are for Xlite pro.
     
  3. soumaya

    Joined:
    Jul 15, 2008
    Messages:
    4
    Likes Received:
    0
    thanks danardf;
    but i do this configuration but nothing ....i don't receive any communication video
    i created 2 extensions 1001 and 1002:
    [1001]
    type=friend
    secret=1001
    record_out=Adhoc
    record_in=Adhoc
    qualify=yes
    port=5060
    pickupgroup=
    nat=yes
    mailbox=1001@device
    host=dynamic
    dtmfmode=rfc2833
    disallow=
    dial=SIP/1001
    context=from-internal
    canreinvite=no
    callgroup=
    callerid=device <1001>
    call-limit=4
    allow=h263
    accountcode=
    call-limit=50
    and in sip.conf:
    [general]
    #include sip_general_additional.conf

    bindport = 5060 ; Port to bind to (SIP is 5060)
    bindaddr = 0.0.0.0 ; Address to bind to (all addresses on machine)
    disallow=all
    allow=h263
    allow=h263p
    allow=h264
    allow=alaw
    allow=ulaw

    my softphone is a eyebeam and i have a ring within this 2 extensions....
    so where is the problem?????
     
  4. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    you must use a debug mode:

    CLI>sip debug peer 1001

    and look.

    the extensions run on the same LAN?

    Post edited by: danardf, at: 2008/07/19 12:18<br><br>Post edited by: danardf, at: 2008/07/19 12:29
     

Share This Page