Problem SPA400 all Lines

Discussion in 'General' started by juancarlosg6, Dec 4, 2008.

  1. juancarlosg6

    Joined:
    Nov 30, 2008
    Messages:
    16
    Likes Received:
    0
    Hola tengo un spa400 configurado con el manual adjunto, aparentemente funciona, pero el problema es que solo me estan entrando llamadas por la linea 1, el resto de lineas timbra como si estuviera entrando la llamada, pero no lo pasa al IVR, que podra ser?, necesito que las 4 lineas puedan ingresar las llamadas, que puedo hacer, a alguien le ha pasado?


    Overview:
    The Linksys SPA400 is a 4 Line FXO gateway capable of connecting 4
    PSTN lines to your asterisk system to make and receive calls. This
    guide is a step by step on how to configure Trixbox to utilize the
    features of the SPA400. Limitations:
    * The voicemail function of the SPA400 cannot be used.
    * You cannot select which line of the SPA400 to use. They are
    treated as a single group of 1-4 lines. The SPA400 will know
    which lines are available by the line voltage when plugged in.
    Configure the SPA400:
    Step 1
     
  2. juancarlosg6

    Joined:
    Nov 30, 2008
    Messages:
    16
    Likes Received:
    0
    Ya funciono, utilice el mismo manual, pero en el SPA400 en cada uno de los puertos identifique la linea poniendo el numero correspondiente, cosa que en el manual no dice, gracias.
     

Share This Page