== Primary D-Channel on span 1 up

Discussion in 'Gateways' started by segadiarrah, Oct 19, 2009.

  1. segadiarrah

    Joined:
    Jun 18, 2009
    Messages:
    16
    Likes Received:
    0
    Hi .

    == Primary D-Channel on span 1 up

    that repeat all the time in the CLI.

    i've got a TE110P working as E1

    ztcfg -vv show me this

    [root at asterisk ~]# ztcfg -vv

    Zaptel Configuration
    ======================

    SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

    Channel map:

    Channel 01: Clear channel (Default) (Slaves: 01)
    Channel 02: Clear channel (Default) (Slaves: 02)
    Channel 03: Clear channel (Default) (Slaves: 03)
    Channel 04: Clear channel (Default) (Slaves: 04)
    Channel 05: Clear channel (Default) (Slaves: 05)
    Channel 06: Clear channel (Default) (Slaves: 06)
    Channel 07: Clear channel (Default) (Slaves: 07)
    Channel 08: Clear channel (Default) (Slaves: 08)
    Channel 09: Clear channel (Default) (Slaves: 09)
    Channel 10: Clear channel (Default) (Slaves: 10)
    Channel 11: Clear channel (Default) (Slaves: 11)
    Channel 12: Clear channel (Default) (Slaves: 12)
    Channel 13: Clear channel (Default) (Slaves: 13)
    Channel 14: Clear channel (Default) (Slaves: 14)
    Channel 15: Clear channel (Default) (Slaves: 15)
    Channel 16: D-channel (Default) (Slaves: 16)
    Channel 17: Clear channel (Default) (Slaves: 17)
    Channel 18: Clear channel (Default) (Slaves: 18)
    Channel 19: Clear channel (Default) (Slaves: 19)
    Channel 20: Clear channel (Default) (Slaves: 20)
    Channel 21: Clear channel (Default) (Slaves: 21)
    Channel 22: Clear channel (Default) (Slaves: 22)
    Channel 23: Clear channel (Default) (Slaves: 23)
    Channel 24: Clear channel (Default) (Slaves: 24)
    Channel 25: Clear channel (Default) (Slaves: 25)
    Channel 26: Clear channel (Default) (Slaves: 26)
    Channel 27: Clear channel (Default) (Slaves: 27)
    Channel 28: Clear channel (Default) (Slaves: 28)
    Channel 29: Clear channel (Default) (Slaves: 29)
    Channel 30: Clear channel (Default) (Slaves: 30)
    Channel 31: Clear channel (Default) (Slaves: 31)

    zaptel.conf

    # TE110P
    span=1,1,0,ccs,hdb3
    bchan=1-15,17-31
    dchan=16

    zapata.conf

    # E1
    signalling=pri_cpe ; pri_cpe = PRI slave ; pri_net = PRI master
    ;switchtype=national
    swithtype=euroisdn
    echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs.
    echocancelwhenbridged=yes
    echotraining=400 ; Asterisk trains to the beginning of the call, number is
    in milliseconds
    callerid=asreceived
    group=2
    context=from-pstn
    channel => 1-15,17-31

    zttool shows me everything ok

    but the guys said to me that my D-Channel is down

    i'm from MALI, africa

    thanks
     

Share This Page