PRI OUTGOING CLI

Discussion in 'General' started by ferdinandbabst, Mar 29, 2010.

  1. ferdinandbabst

    Joined:
    Mar 23, 2010
    Messages:
    31
    Likes Received:
    0
    Hi

    We have a PRI line attached to our server and our Telco service provider has issued us with 300 numbers. Digium card is in TE mode.
    How do I configure each extension to display its own outgoing CLI as per what the Telecoms service provider offer?
     
  2. esampark

    Joined:
    Mar 30, 2010
    Messages:
    3
    Likes Received:
    0
    If you are able to make outgoing calls with your PRI it means you have already successfully created a trunk for it, Now lets say you want extension 1001 to use caller 2127773456, just go to edit extension 1001, and put 2127773456 in "Outbound CID" and save and apply the changes.
     
  3. mbit

    Joined:
    Jul 4, 2007
    Messages:
    466
    Likes Received:
    0
    In each extension you can set the outgoingcallerid

    Once you have set this, if it doesnt work then you need to set these settings properly in the chan_dahdi.conf

    pridialplan=
    prilocaldialplan=
     

Share This Page