Patton 4960 Setup

bdaneu

Joined
Jul 27, 2010
Messages
4
Likes
0
Points
0
#1
Has anyone tried to link a patton 4960 to elastix and how did you get it to work. I have everything setup and can call out of the patton 4960 to the PRI but when the Call comes in to the patton it never gets to the elastix box it gets blocked by the elastix box.
 

jgutierrez

Joined
Feb 28, 2008
Messages
5,737
Likes
0
Points
0
#2
Paste you patton configuration, and paste the CLI output (asterisk -r) when the calls tries to be received by elastix.
 

bdaneu

Joined
Jul 27, 2010
Messages
4
Likes
0
Points
0
#3
Patton:

#----------------------------------------------------------------#
# #
# SN4960/4E48V #
# R5.7 2011-01-17 H323 RBS SIP #
# 2011-04-06T11:51:16 #
# SN/00A0BA06404E #
# Generated configuration file #
# #
#----------------------------------------------------------------#

cli version 3.20
clock local default-offset -08:00
dns-client server 10.10.10.8
dns-relay
webserver port 80 language en
sntp-client
sntp-client server primary 10.10.10.8 port 123 version 4
sntp-client server secondary 10.10.10.8 port 123 version 4
sntp-client poll-interval 36000
sntp-client local-clock-offset
system hostname gateway.ccmelb.calvarymelbourne.org

system

ic voice 0
pcm law-select uLaw

system
clock-source 1 e1t1 0 0

profile r2 default

profile napt NAPT_WAN
profile napt NAPT

profile ppp default

profile call-progress-tone US_Dialtone
profile call-progress-tone US_Alertingtone
play 1 2000 440 -19 480 -19
pause 2 4000

profile call-progress-tone US_Busytone
play 1 500 480 -24 620 -24
pause 2 500

profile tone-set default
profile tone-set US
map call-progress-tone dial-tone US_Dialtone
map call-progress-tone ringback-tone US_Alertingtone
map call-progress-tone busy-tone US_Busytone
map call-progress-tone release-tone US_Busytone
map call-progress-tone congestion-tone US_Busytone

profile voip default
codec 1 g729 rx-length 20 tx-length 20
codec 2 g711alaw64k rx-length 20 tx-length 20
codec 3 g711ulaw64k rx-length 20 tx-length 20
codec negotiation
rtp traffic-class local-default
fax transmission 1 relay t38-udp

profile pstn default

profile sip default
no autonomous-transitioning

profile aaa default
method 1 local
method 2 none

context ip router

interface WAN
ipaddress dhcp
use profile napt NAPT_WAN
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

interface LAN
ipaddress 10.10.250.10 255.255.255.0
tcp adjust-mss rx mtu
tcp adjust-mss tx mtu

context ip router
route 0.0.0.0 0.0.0.0 10.10.250.1 0

context cs switch
national-prefix 0
international-prefix 00

routing-table called-e164 RT_ISDN_TO_SIP
route T dest-interface IF_SIP

routing-table calling-e164 RT_SIP_TO_ISDN
route default dest-service SV_HUNT_PSTN MP_Unknown-Subscriber

mapping-table calling-e164 to calling-type-of-number MP_Unknown-Subscriber
map default to subscriber

interface isdn IF_ISDN_0
route call dest-table RT_ISDN_TO_SIP

interface isdn IF_ISDN_1
route call dest-table RT_ISDN_TO_SIP

interface sip IF_SIP
bind context sip-gateway GW_SIP
route call dest-table RT_SIP_TO_ISDN
remote 10.20.0.250

service hunt-group SV_HUNT_PSTN
drop-cause normal-unspecified
drop-cause no-circuit-channel-available
drop-cause network-out-of-order
drop-cause temporary-failure
drop-cause switching-equipment-congestion
drop-cause access-info-discarded
drop-cause circuit-channel-not-available
drop-cause resources-unavailable
route call 1 dest-interface IF_ISDN_0
route call 2 dest-interface IF_ISDN_1

context cs switch
no shutdown

authentication-service AUTH_AASTRA800
realm 1 10.20.0.250
username patton password 9GKpLslKIhq02NNIEvCaIg== encrypted

location-service LS_AASTRA800
domain 1 10.20.0.250 5060

identity patton

authentication inbound
authenticate 1 authentication-service AUTH_AASTRA800 username patton

context sip-gateway GW_SIP

interface IF_GW_SIP
bind interface LAN context router port 5060

context sip-gateway GW_SIP
bind location-service LS_AASTRA800
no shutdown

port ethernet 0 0
medium auto
encapsulation ip
bind interface WAN router
no shutdown

port ethernet 0 1
medium auto
encapsulation ip
bind interface LAN router
no shutdown

port e1t1 0 0
port-type t1
clock slave
linecode b8zs
framing esf
encapsulation q921

q921
permanent-layer2
uni-side user
encapsulation q931

q931
protocol ni2
uni-side user
bchan-number-order descending
encapsulation cc-isdn
bind interface IF_ISDN_0 switch

port e1t1 0 0
no shutdown

port e1t1 0 1
port-type e1
clock master
framing crc4
shutdown

port e1t1 0 2
port-type e1
clock master
framing crc4
shutdown

port e1t1 0 3
port-type e1
clock master
framing crc4
shutdown

Asterisk

== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,887
Members
17,567
Latest member
achilont13
Top