Paging and intertcom

Discussion in 'General' started by u4elastix, Feb 6, 2010.

  1. u4elastix

    Joined:
    Oct 29, 2009
    Messages:
    32
    Likes Received:
    0
    I am haveing some trouble getting my paging and itercom working like I think it should. I have set up a paging grup 330 and added some extensions. Problem is when I dial 330 send it rings all the extensions. What I want to be able to do is anouce something such as call parked 71 for parts department. Is this possible?

    Thanks Loren
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    From the info at the top of the "Paging and Intercom" page:-

    This module is for specific phones that are capable of Paging or Intercom. This section is for configuring group paging, intercom is configured through Feature Codes. Intercom must be enabled on a handset before it will allow incoming calls. It is possible to restrict incoming intercom calls to specific extensions only, or to allow intercom calls from all extensions but explicitly deny from specific extensions.

    This module should work with Aastra, Grandstream, Linksys/Sipura, Mitel, Polycom, SNOM , and possibly other SIP phones (not ATAs). Any phone that is always set to auto-answer should also work (such as the console extension if configured).

    Example usage:
    *80nnn: Intercom extension nnn
    *54: Enable all extensions to intercom you (except those explicitly denied)
    *54nnn: Explicitly allow extension nnn to intercom you (even if others are disabled)
    *55: Disable all extensions from intercom you (except those explicitly allowed)
    *55nnn: Explicitly deny extension nnn to intercom you (even if generally enabled)

    If your extensions phones meet these criteria, then it should work.
     

Share This Page