OVerlap not work!!!

Discussion in 'Gateways' started by Pang, May 20, 2010.

  1. Pang

    Joined:
    May 13, 2010
    Messages:
    4
    Likes Received:
    0
    I had setup the Elastix 1.6 32 bits and using TE110P E1 connect to other PBX. But other PBX only support overlap sending. Anyone know how to set up in Elastix? And I try to change the below setting but still not work. Any idea? Please advise!

    dahdi_channels.conf
    ; Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER)
    group=0,11
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 1-15,17-31
    context = default
    group = 63
    overlap=no
    overlapdial=incoming
     

Share This Page