outbound CID based on CID

Discussion in 'General' started by vtofa, Oct 8, 2010.

  1. vtofa

    Joined:
    Oct 21, 2008
    Messages:
    67
    Likes Received:
    0
    We have installed Elastix 1.6 for a local office for which we set up a trunk to another office connecting to an Aastralink Pro 160. The calls for the main office go out to the public on a T1 and the CID for outbound calls is set for group ZAP/g0. However, we want calls routed from the remote office to go out the T1 to have another CID. I could route all calls out a ZAP/X channel specifically but that would restrict the outbound calls for the trunk to one. Any suggestions?

    Regards,
    vtofa
     
  2. vtofa

    Joined:
    Oct 21, 2008
    Messages:
    67
    Likes Received:
    0
    Actually, what I need to do is route all calls from the SIP trunk destined for outside to go out a specific Zap channel or group. This routing is not to depend only on the called number but by the source being the SIP trunk.
     

Share This Page