OpenVox g400p

Discussion in 'General' started by mjtelfer, Mar 23, 2011.

  1. mjtelfer

    Joined:
    Feb 12, 2010
    Messages:
    4
    Likes Received:
    0
    Running Elastix 2.0.3, have installed 2 OpenVox cards, A400p and G400p.
    The A440p is working fine, but the G400p only can make outgoing calls.
    My inbound route works with A400p but not the G400p,
    unless I add to etc/asterisk/extensions_custom.config

    [from-gsm]
    exten => s, 1, Answer()
    exten=> s, n, Dial(SIP/3000)


    Would like incoming GSM to goto IVR

    Tried
    exten => s,n,Goto(ivr-2,s,begin)

    Doesn't work

    Any help appreciated
     
  2. mjtelfer

    Joined:
    Feb 12, 2010
    Messages:
    4
    Likes Received:
    0
    Ok fixed it,

    In case anyone is interested, took out from
    etc/asterisk/extensions_custom.config
    [from-gsm]
    exten => s, 1, Answer()
    exten=> s, n, Dial(SIP/3000)

    Changed in

    etc/asterisk/extra-channels.conf

    ; Span 1: opvxg4xx/0/1 "OpenVox G400P GSM/CDMA PCI Card 0" (MASTER)
    group=11
    context=from-gsm
    signalling = gsm
    ;pin=1234
    channel => 1
    context = default
    group = 63

    TO

    ; Span 1: opvxg4xx/0/1 "OpenVox G400P GSM/CDMA PCI Card 0" (MASTER)
    group=11
    context=from-pstn
    signalling = gsm
    ;pin=1234
    channel => 1
    context = default
    group = 63

    In and out works now through Elastix
     

Share This Page