OpenVox B800 witn Elastix 1.5.2

Discussion in 'Gateways' started by jaittu, Apr 24, 2009.

  1. jaittu

    Joined:
    Mar 15, 2009
    Messages:
    14
    Likes Received:
    0
    Hi all,

    Any one have experience with the installation procedure of OpenVox B800 module with Elastix 1.5.2. I am a Newbaby with elastix.

    Do I need to patch the mISDN with b800P_patch_1_1_7 or the new version will automatically detect the Card?

    Also After the detection How can I Create the Outbound trunk, as I can't select the Zap Identifier (trunk name)?



    Regards,
    Jaison
     
  2. maikcat

    Joined:
    Apr 24, 2009
    Messages:
    38
    Likes Received:
    0
    try the following..

    mISDN scan
    mISDN config
    mISDN start
    misdn-init scan
    misdn-init config
    misdn-init start

    next from gui check under hardware detection in misdn box .

    cheers,
    michael
     
  3. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    Have a look here and follow instructons:

    http://www.asterisk-es-rsp.org/blog/?p=5

    This is a really nice tutorial, maybe you can use google translate if you can't read Spanish.

    Doing this you recompile asterisk, dahdi, etc and it includes a driver to use your card with dahdi instead of mISDN.

    I have tried in Elastix 1.5.2 and it works fine.

    Good luck!
     
  4. rollinsolo

    Joined:
    Feb 11, 2009
    Messages:
    279
    Likes Received:
    0
    Can anyone confirm that this also works with 1.6 and a US PRI? Just curious thanks. Will 2.0 incorporate all the updated Dahdi drivers?
     
  5. james.zhu

    Joined:
    Feb 13, 2008
    Messages:
    99
    Likes Received:
    0
    hello:
    you can use mISDN with B800P in elastix-1.6, but for 2.0 will update to wcb4xxp. you also
    can install mISDN instead of wcb4xxp. so far, we tested, the 2.0-wcb4xxp support TE mode.
    for pri, you have to use openvox D110P/D210X/D410X.
     
  6. james.zhu

    Joined:
    Feb 13, 2008
    Messages:
    99
    Likes Received:
    0
    hello:
    you can use mISDN with B800P in elastix-1.6, but for 2.0 will update to wcb4xxp. you also
    can install mISDN instead of wcb4xxp. so far, we tested, the 2.0-wcb4xxp supports TE mode.
    for pri, you have to use openvox D110P/D210X/D410X.
     
  7. james.zhu

    Joined:
    Feb 13, 2008
    Messages:
    99
    Likes Received:
    0
    hello:
    you can use mISDN with B800P in elastix-1.6, but for 2.0 will update to wcb4xxp. you also
    can install mISDN instead of wcb4xxp. so far, we tested, the 2.0-wcb4xxp supports TE mode.
    for pri, you have to use openvox D110P/D210P/D410P. to install B800P with mISDN, please refer this:
    http://downloads.openvox.cn/pub/manuals ... _mISDN.pdf
     

Share This Page