Nokia E65

Discussion in 'IP Phones' started by danardf, Oct 25, 2008.

  1. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    Hi.

    I can't do worked the E65 to Elastix:
    120 -(Unspecified) - UNKNOWN

    With this E65 config on this link.

    Code:
    From Elastix:
    [120]
    type=friend
    secret=xxxx
    record_out=Adhoc
    record_in=Adhoc
    qualify=yes
    port=5060
    pickupgroup=
    nat=yes
    mailbox=120@default
    host=dynamic
    dtmfmode=rfc2833
    disallow=all
    dial=SIP/120
    context=from-internal
    canreinvite=no
    callgroup=
    callerid=device <120>
    allow=alaw
    accountcode=
    call-limit=50
    
    On my E65, i've always 'registration failed' :(

    If somebody know how do it?

    thanks for your help ;)
     
  2. manzurek

    Joined:
    Jun 22, 2007
    Messages:
    194
    Likes Received:
    0
    This is the configuration that I work myself with Nokia E65 to use it like telephone IP wi-fi with Asterisk:

    Menu => Tools => Settings => Configuration => Connection => SIP settings
    Name Mode = Asteriskperu
    Service Mode = IETF
    Access Point = <your AP>
    Username = sip:<extension number>@<ip address server asterisk>
    Compression = No
    Register = Always active
    Use security = no
    Proxy Parameter (NO)
    Register Parameter
    Register Parameter = sip:<ip address server asterisk>
    Domain = asterisk (¡¡¡¡¡¡¡ Very Important !!!!!!!!)
    Username = <extension number>
    Password = <extension password>
    Type of transport = UDP
    Port = 5060

    Menu => Tools => Settings => Connection => Internet tel. settings
    New profile
    Name = Asterisk
    SIP Profiles = Asteriskperu

    For that they have a Cisco CallManager in the work, they can use Nokia Intellisync Call Connect for Cisco it emulates to a telephone 7970 in CallManager
     
  3. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    Thanks.

    For the moment, my Wifi work only if i use the web browser!

    Exemple:
    From Elastix server, i'm connect with ssh. I make a ping to my mokia.
    Not ping.
    Now, i'm connect to the web (web page) from my nokia, so the link is good and the page displayed very good. If i remake the ping: Is good.

    I release the web browser, not ping.

    It's normal?

    How my nokia can do connect to Elastix if the link is not ok?! :blink:
    The ping (link) must be always up, no?
     
  4. danardf

    Joined:
    Dec 3, 2007
    Messages:
    8,069
    Likes Received:
    12
    I don't know why, but, it's work now! :blink: :woohoo:

    Thanks very much manzurek :)
     

Share This Page