NO PUEDO REALIZAR LLAMADAS

Discussion in 'Elastix 2.x' started by ckinoto, Apr 6, 2009.

  1. ckinoto

    Joined:
    Mar 13, 2009
    Messages:
    10
    Likes Received:
    0
    reinstale por completo la version 1.5.9
    tengo un digium con 2 fxo y 2 puertos libres
    utilizo el fxo en el channel 1 y 3
    cada canal tiene una linea que redirige las llamadas a la recepcion correspondiente
    2000 y 3000

    las llamadas entre los internos funciona bien
    lo que no puedo es realizar las llamadas a traves de la pstn
    mi configuracion es la siguiente:

    los codecs:
    INT BINARY HEX TYPE NAME DESC
    --------------------------------------------------------------------------------
    1 (1 << 0) (0x1) audio g723 (G.723.1)
    2 (1 << 1) (0x2) audio gsm (GSM)
    4 (1 << 2) (0x4) audio ulaw (G.711 u-law)
    8 (1 << 3) (0x8) audio alaw (G.711 A-law)
    16 (1 << 4) (0x10) audio g726aal2 (G.726 AAL2)
    32 (1 << 5) (0x20) audio adpcm (ADPCM)
    64 (1 << 6) (0x40) audio slin (16 bit Signed Linear PCM)
    128 (1 << 7) (0x80) audio lpc10 (LPC10)
    256 (1 << 8) (0x100) audio g729 (G.729A)
    512 (1 << 9) (0x200) audio speex (SpeeX)
    1024 (1 << 10) (0x400) audio ilbc (iLBC)
    2048 (1 << 11) (0x800) audio g726 (G.726 RFC3551)
    4096 (1 << 12) (0x1000) audio g722 (G722)
    65536 (1 << 16) (0x10000) image jpeg (JPEG image)
    131072 (1 << 17) (0x20000) image png (PNG image)
    262144 (1 << 18) (0x40000) video h261 (H.261 Video)
    524288 (1 << 19) (0x80000) video h263 (H.263 Video)
    1048576 (1 << 20) (0x100000) video h263p (H.263+ Video)
    2097152 (1 << 21) (0x200000) video h264 (H.264 Video)


    dahdi-channels.conf

    ; Autogenerated by /usr/sbin/dahdi_genconf on Mon Apr 6 07:43:43 2009 -- do not hand edit
    ; Dahdi Channels Configurations (chan_dahdi.conf)
    ;
    ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
    ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings
    ;

    ; Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
    ;;; line="1 WCTDM/0/0 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 1
    callerid=
    group=
    context=default

    ;;; line="3 WCTDM/0/2 FXSKS"
    signalling=fxs_ks
    callerid=asreceived
    group=0
    context=from-pstn
    channel => 3
    callerid=
    group=
    context=default

    chan_dahdi.conf

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=no
    faxdetect=incoming
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    ;busydetect=yes
    ;busycount=6


    immediate=yes

    #include dahdi-channels.conf
    #include chan_dahdi_additional.conf


    asterisk.conf


    [directories]
    astetcdir => /etc/asterisk
    astmoddir => /usr/lib/asterisk/modules
    astvarlibdir => /var/lib/asterisk
    astagidir => /var/lib/asterisk/agi-bin
    astspooldir => /var/spool/asterisk
    astrundir => /var/run/asterisk
    astlogdir => /var/log/asterisk
    astdatadir => /var/lib/asterisk

    [options]
    transmit_silence_during_record = yes
    languageprefix=yes
    execincludes=yes


    EXTENSIONES:

    # RMD <2000>
    # VICTOR DUBARRY <2001>
    # GERMAN MATUS <2002>
    # LUCAS DUARTE <2003>
    # RAYINI MAUDSLAY <2004>
    # RTA <3000>
    # ESTELA ARAUJO <3001>
    # NORA TIEMANN <3002>
    # GABY <3003>

    En Zap Channels DIDS tengo
    ma y ta como nombres
    y el numero telefonico como para poder identificar las llamadas entrantes
    Canal 1 y 3 que coresponden a ma y ta


    en rutas entrantes tengo dos
    que coinciden con los DIDS y reenvia al interno suena el telefono
    pero no se escucha nada

    RUTAS SALIENTES:
    ZAP 1 CON DIAL
    8|.

    ZAP 3
    9|.

    MARCO EL NUMERO 9 U 8 SI QUIERO SALIR CON UNA U OTRA LINEA
    MARCO 0985XXXXXX PARA DESTINO UN CELULAR

    INDICATIONS
    [general]
    country=ve



    [ve]
    ; Tone definition source for ve found on
    ; Reference: http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
    ringcadence = 1000,4000
    dial = 425
    busy = 425/500,0/500
    ring = 425/1000,0/4000
    congestion = 425/250,0/250
    callwaiting = 400+450/300,0/6000
    dialrecall = 425
    record = 1400/500,0/15000
    info = !950/330,!1440/330,!1800/330,0/1000



    toque la configuracion para que coincida con Paraguay
    muy parecidos son



    Los telefonos son comunes con adaptadores pap2 solo se usa la linea 1

    Este es el dial tone
    350@-19,440@-19;10(*/0/1+2)
    dial tone 2
    420@-19,520@-19;10(*/0/1+2)
    tono de ocupado
    480@-19,620@-19;10(.5/.5/1+2)
    Call 1 Encoder: G711a Call 2 Encoder:
    Call 1 Decoder: G711a
    Yo no se si es problemas de codec o que pero no sale la lamada lo mas raro que si utilzo
    el panel del operador y tiro la linea zap1 al interno da tono de discado y se puede realizar la llamada

    las llamadas entrastes como dije suenan pero al contestar no se escucha nada.

    Alguna recomendacion estoy desesperador!!

    si alguien se ofrece en ayudarme le voy a agradecer


    les paso el log del asterisk




    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-outbound-callerid:8] Set("SIP/2000-09208fa8", "TRUNKOUTCID=071720350") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: Set

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/2000-09208fa8", "1?trunkcid") in new stack

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Goto (macro-outbound-callerid,s,12)

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/2000-09208fa8", "1|Set|CALLERID(all)=071720350") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: ExecIf

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Last app: Set|CALLERID(all)=071720350

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/2000-09208fa8", "1?exit") in new stack

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Goto (macro-outbound-callerid,s,11)

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-outbound-callerid:11] MacroExit("SIP/2000-09208fa8", "") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: Macro

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/2000-09208fa8", "0|AGI|fixlocalprefix") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: ExecIf

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:13] Set("SIP/2000-09208fa8", "OUTNUM=0985795001") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: Set

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:14] Set("SIP/2000-09208fa8", "custom=DAHDI/g0") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: Set

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/2000-09208fa8", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: ExecIf

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/2000-09208fa8", "dialout-trunk-predial-hook|") in new stack

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/2000-09208fa8", "") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: Macro

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/2000-09208fa8", "0?bypass|1") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/2000-09208fa8", "0?customtrunk") in new stack

    Apr 6 13:33:46 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/2000-09208fa8", "DAHDI/g0/0985795001|300|") in new stack

    Apr 6 13:33:46 NOTICE [6956] app_dial.c:

    Hey! chan SIP/2000-09208fa8's context='macro-dialout-trunk', and exten='s'



    Apr 6 13:33:46 DEBUG [6956] chan_dahdi.c:

    Dialing '0985795001'

    Apr 6 13:33:46 DEBUG [6956] chan_dahdi.c:

    Deferring dialing...

    Apr 6 13:33:46 VERBOSE [6956] logger.c:

    -- Called g0/0985795001

    Apr 6 13:33:46 DEBUG [6956] chan_dahdi.c:

    Sent deferred digit string: T098579500

    Apr 6 13:33:48 DEBUG [6956] chan_dahdi.c:

    Engaged echo training on channel 1

    Apr 6 13:33:50 DEBUG [6956] chan_dahdi.c:

    Echo cancellation already on

    Apr 6 13:33:50 VERBOSE [6956] logger.c:

    -- DAHDI/1-1 answered SIP/2000-09208fa8

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [h@macro-dialout-trunk:1] Macro("SIP/2000-09208fa8", "hangupcall|") in new stack

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/2000-09208fa8", "w") in new stack

    Apr 6 13:34:40 DEBUG [6956] app_macro.c:

    Executed application: ResetCDR

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/2000-09208fa8", "") in new stack

    Apr 6 13:34:40 DEBUG [6956] app_macro.c:

    Executed application: NoCDR

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/2000-09208fa8", "1?skiprg") in new stack

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Goto (macro-hangupcall,s,6)

    Apr 6 13:34:40 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/2000-09208fa8", "1?skipblkvm") in new stack

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Goto (macro-hangupcall,s,9)

    Apr 6 13:34:40 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/2000-09208fa8", "1?theend") in new stack

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Goto (macro-hangupcall,s,11)

    Apr 6 13:34:40 DEBUG [6956] app_macro.c:

    Executed application: GotoIf

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Executing [s@macro-hangupcall:11] Hangup("SIP/2000-09208fa8", "") in new stack

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/2000-09208fa8' in macro 'hangupcall'

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    == Spawn h extension (macro-dialout-trunk, h, 1) exited non-zero on 'SIP/2000-09208fa8'

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    -- Hungup 'DAHDI/1-1'

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    == Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/2000-09208fa8' in macro 'dialout-trunk'

    Apr 6 13:34:40 VERBOSE [6956] logger.c:

    == Spawn extension (from-internal, 90985795001, 4) exited non-zero on 'SIP/2000-09208fa8'

    Apr 6 13:35:01 VERBOSE [6900] logger.c:

    -- Remote UNIX connection

    Apr 6 13:35:02 VERBOSE [6961] logger.c:

    -- Remote UNIX connection disconnected
     
  2. ckinoto

    Joined:
    Mar 13, 2009
    Messages:
    10
    Likes Received:
    0
    SOlucione completamente cambiando a la ultima version de TIRXBOX instale y funciono sin problemas configurando no se porq siendo que configure de la misma manera el elastix
     
  3. marivera

    Joined:
    Nov 20, 2007
    Messages:
    253
    Likes Received:
    0
    Perdona que aprobeche tu pregunta para hacerte otra
    ¿como rediriges las llamadas de los puertos fx a las operadoras?
     
  4. ckinoto

    Joined:
    Mar 13, 2009
    Messages:
    10
    Likes Received:
    0
    creas un troncal
    creas una salida con dial patern 9|. a puntando al troncal creado
    de esa manera antecedes al numero nueve al numero a discar
    y ya esta
     

Share This Page