No outbound - All circuits are busy - TE122

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#1
Hi Guys,

I have been trying to configure outbound calls to work with a Digium TE122 card for a long time now and tried several fixes here but didn't manage to fix it so here is the full details of the config, notice that i am using an E1 Line and the jumper on the card is configured correctly

/etc/dahdi/system.conf

Code:
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller = mg2,1-15,17-31

# Global data

#loadzone       = us
#defaultzone    = us
/etc/asterisk/dahdi-channels.conf
Code:
; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4
context=from-pstn
switchtype = national
signalling = pri_cpe
group=1
echocancel=yes
channel => 1-15,17-31
pridialplan=local
faxdetect=incoming
callprogress=yes
usecallerid=yes
echocancelwhenbridged=no
echotraining=800
rxgain=2.0
txgain=2.0
/etc/asterisk/chan_dahdi.conf
Code:
[trunkgroups]

[channels]
context=from-pstn
signalling=fxs_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
faxdetect=incoming
echotraining=800
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1

;Uncomment these lines if you have problems with the disconection of your analog lines
busydetect=yes
busycount=3


immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.con
on Asterisk CLI, dahdi show channels shows:
Code:
elastix*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret       
 pseudo            default                    default             
      1            from-pstn                  default             
      2            from-pstn                  default             
      3            from-pstn                  default             
      4            from-pstn                  default             
      5            from-pstn                  default             
      6            from-pstn                  default             
      7            from-pstn                  default             
      8            from-pstn                  default             
      9            from-pstn                  default             
     10            from-pstn                  default             
     11            from-pstn                  default             
     12            from-pstn                  default             
     13            from-pstn                  default             
     14            from-pstn                  default             
     15            from-pstn                  default             
     17            from-pstn                  default             
     18            from-pstn                  default             
     19            from-pstn                  default             
     20            from-pstn                  default             
     21            from-pstn                  default             
     22            from-pstn                  default             
     23            from-pstn                  default             
     24            from-pstn                  default             
     25            from-pstn                  default             
     26            from-pstn                  default             
     27            from-pstn                  default             
     28            from-pstn                  default             
     29            from-pstn                  default             
     30            from-pstn                  default             
     31            from-pstn                  default
When i dial an outside number, i get the following from the CLI:
Code:
    -- Executing [9150@from-internal:1] Macro("SIP/6002-08288878", "user-callerid|SKIPTTL|") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/6002-08288878", "AMPUSER=6002") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/6002-08288878", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/6002-08288878", "1|Set|REALCALLERIDNUM=6002") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/6002-08288878", "AMPUSER=6002") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/6002-08288878", "AMPUSERCIDNAME=6002") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/6002-08288878", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/6002-08288878", "AMPUSERCID=6002") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/6002-08288878", "CALLERID(all)="6002" <6002>") in new stack
    -- Executing [s@macro-user-callerid:9] Set("SIP/6002-08288878", "REALCALLERIDNUM=6002") in new stack
    -- Executing [s@macro-user-callerid:10] ExecIf("SIP/6002-08288878", "0|Set|CHANNEL(language)=") in new stack
    -- Executing [s@macro-user-callerid:11] GotoIf("SIP/6002-08288878", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,20)
    -- Executing [s@macro-user-callerid:20] NoOp("SIP/6002-08288878", "Using CallerID "6002" <6002>") in new stack
    -- Executing [9150@from-internal:2] Set("SIP/6002-08288878", "_NODEST=") in new stack
    -- Executing [9150@from-internal:3] Macro("SIP/6002-08288878", "record-enable|6002|OUT|") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/6002-08288878", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SIP/6002-08288878", "recordingcheck|20091007-130307|1254913387.1") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20091007-130307|1254913387.1: Outbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] MacroExit("SIP/6002-08288878", "") in new stack
    -- Executing [9150@from-internal:4] Macro("SIP/6002-08288878", "dialout-trunk|2|150||") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/6002-08288878", "DIAL_TRUNK=2") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/6002-08288878", "0?sub-pincheck|s|1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/6002-08288878", "0?disabletrunk|1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/6002-08288878", "DIAL_NUMBER=150") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/6002-08288878", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/6002-08288878", "OUTBOUND_GROUP=OUT_2") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/6002-08288878", "0?nomax") in new stack
    -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/6002-08288878", "0?chanfull") in new stack
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/6002-08288878", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/6002-08288878", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/6002-08288878", "outbound-callerid|2") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/6002-08288878", "0|SetCallerPres|") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/6002-08288878", "0|Set|REALCALLERIDNUM=6002") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/6002-08288878", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/6002-08288878", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/6002-08288878", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/6002-08288878", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/6002-08288878", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/6002-08288878", "0|Set|CALLERID(all)=") in new stack
    -- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/6002-08288878", "1?exit") in new stack
    -- Goto (macro-outbound-callerid,s,11)
    -- Executing [s@macro-outbound-callerid:11] MacroExit("SIP/6002-08288878", "") in new stack
    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/6002-08288878", "0|AGI|fixlocalprefix") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/6002-08288878", "OUTNUM=150") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/6002-08288878", "custom=DAHDI/g1") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/6002-08288878", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/6002-08288878", "dialout-trunk-predial-hook|") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/6002-08288878", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/6002-08288878", "0?bypass|1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/6002-08288878", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/6002-08288878", "DAHDI/g1/150|300|") in new stack
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/6002-08288878", "s-CONGESTION|1") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
    -- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/6002-08288878", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,3)
    -- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/6002-08288878", "TRUNK Dial failed due to CONGESTION - failing through to other trunks") in new stack
    -- Executing [9150@from-internal:5] Macro("SIP/6002-08288878", "outisbusy|") in new stack
    -- Executing [s@macro-outisbusy:1] Playback("SIP/6002-08288878", "all-circuits-busy-now|noanswer") in new stack
    -- <SIP/6002-08288878> Playing 'all-circuits-busy-now' (language 'en')
Really destroying SIP dialog '67f6afb174bfd46259f0a3ea6f032be2@192.168.168.55' Method: OPTIONS
    -- Executing [s@macro-outisbusy:2] Playback("SIP/6002-08288878", "pls-try-call-later|noanswer") in new stack
    -- <SIP/6002-08288878> Playing 'pls-try-call-later' (language 'en')
    -- Executing [s@macro-outisbusy:3] Macro("SIP/6002-08288878", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/6002-08288878", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/6002-08288878", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/6002-08288878", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/6002-08288878", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/6002-08288878", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SIP/6002-08288878", "") in new stack
  == Spawn extension (from-internal, 9150, 5) exited non-zero on 'SIP/6002-08288878'
    -- Executing [h@from-internal:1] Macro("SIP/6002-08288878", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/6002-08288878", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/6002-08288878", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/6002-08288878", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/6002-08288878", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/6002-08288878", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SIP/6002-08288878", "") in new stack
  == Spawn extension (from-internal, s, 1) exited non-zero on 'SIP/6002-08288878'

Please lets troubleshot this problem as it was faced by a lot of Elastix users ..

Thanks in advance.
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#2
Dear all

hi,please don't change anything first.

first you add in chan_dahdi this function too:

signalling=pri_net(you can see E1 developer features first)

switchtype=euroisdn

overlapdial=yes


good luck
 

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#3
Thanks iraj

You mean add those at the end of the file ? before the other dahdi files includes ?
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#4
hi

you add in chan_dahdi fetures

and restart system.


good luck
 

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#5
I did that, however i still get the same error message ..
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#6
hi


you removed signalling=fxs_ks?
 

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#7
As you can see from the first post /etc/asterisk/chan_dahdi.conf contains the line "signalling=fxs_ks"
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#8
yes this is my file:

[trunkgroups]
;stripmsd=1
;callerid=asreceived

[channels]
context=default
switchtype=euroisdn
overlapdial=yes
pridialplan=local
priindication=outofband
signalling=pri_net
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
transfer=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
callprogress=no
callerid=asreceived
group=1
channel=>1-15,17-31


;Uncomment these lines if you have problems with the disconection of your analog lines
;busydetect=yes
;busycount=3

language=en

immediate=no

#include dahdi-channels.conf
#include chan_dahdi_additional.conf
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#9
please try with this and

service dahdi restart
 

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#10
i replaced my file with your file then restarted the services.. Same error though "all circuits busy"
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#11
can you show me your outbound ?
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#12
can you tell me what is in beside elastix?

pabx?
pbx?
call center?

what...?
 

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#13
I am sorry but what do you mean by outbound ? which file should i get you, also i didn't understand your second question ? we are trying to use that machine for a call center
 

iraj.kheirati

Joined
Dec 4, 2008
Messages
47
Likes
0
Points
0
#14
please check logs with asterisk cli(asterisk -rvvvvvvv)and send me too.


thanks
 

Digitalized

Joined
Oct 6, 2009
Messages
11
Likes
0
Points
0
#15
Code:
    -- Executing [9150@from-internal:1] Macro("SIP/6002-08779d60", "user-callerid|SKIPTTL|") in new stack
    -- Executing [s@macro-user-callerid:1] Set("SIP/6002-08779d60", "AMPUSER=6002") in new stack
    -- Executing [s@macro-user-callerid:2] GotoIf("SIP/6002-08779d60", "0?report") in new stack
    -- Executing [s@macro-user-callerid:3] ExecIf("SIP/6002-08779d60", "1|Set|REALCALLERIDNUM=6002") in new stack
    -- Executing [s@macro-user-callerid:4] Set("SIP/6002-08779d60", "AMPUSER=6002") in new stack
    -- Executing [s@macro-user-callerid:5] Set("SIP/6002-08779d60", "AMPUSERCIDNAME=6002") in new stack
    -- Executing [s@macro-user-callerid:6] GotoIf("SIP/6002-08779d60", "0?report") in new stack
    -- Executing [s@macro-user-callerid:7] Set("SIP/6002-08779d60", "AMPUSERCID=6002") in new stack
    -- Executing [s@macro-user-callerid:8] Set("SIP/6002-08779d60", "CALLERID(all)="6002" <6002>") in new stack
    -- Executing [s@macro-user-callerid:9] Set("SIP/6002-08779d60", "REALCALLERIDNUM=6002") in new stack
    -- Executing [s@macro-user-callerid:10] ExecIf("SIP/6002-08779d60", "0|Set|CHANNEL(language)=") in new stack
    -- Executing [s@macro-user-callerid:11] GotoIf("SIP/6002-08779d60", "1?continue") in new stack
    -- Goto (macro-user-callerid,s,20)
    -- Executing [s@macro-user-callerid:20] NoOp("SIP/6002-08779d60", "Using CallerID "6002" <6002>") in new stack
    -- Executing [9150@from-internal:2] Set("SIP/6002-08779d60", "_NODEST=") in new stack
    -- Executing [9150@from-internal:3] Macro("SIP/6002-08779d60", "record-enable|6002|OUT|") in new stack
    -- Executing [s@macro-record-enable:1] GotoIf("SIP/6002-08779d60", "1?check") in new stack
    -- Goto (macro-record-enable,s,4)
    -- Executing [s@macro-record-enable:4] AGI("SIP/6002-08779d60", "recordingcheck|20091007-154726|1254923246.3") in new stack
    -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
  recordingcheck|20091007-154726|1254923246.3: Outbound recording not enabled
    -- AGI Script recordingcheck completed, returning 0
    -- Executing [s@macro-record-enable:5] MacroExit("SIP/6002-08779d60", "") in new stack
    -- Executing [9150@from-internal:4] Macro("SIP/6002-08779d60", "dialout-trunk|2|150||") in new stack
    -- Executing [s@macro-dialout-trunk:1] Set("SIP/6002-08779d60", "DIAL_TRUNK=2") in new stack
    -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/6002-08779d60", "0?sub-pincheck|s|1") in new stack
    -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/6002-08779d60", "0?disabletrunk|1") in new stack
    -- Executing [s@macro-dialout-trunk:4] Set("SIP/6002-08779d60", "DIAL_NUMBER=150") in new stack
    -- Executing [s@macro-dialout-trunk:5] Set("SIP/6002-08779d60", "DIAL_TRUNK_OPTIONS=tr") in new stack
    -- Executing [s@macro-dialout-trunk:6] Set("SIP/6002-08779d60", "OUTBOUND_GROUP=OUT_2") in new stack
    -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/6002-08779d60", "0?nomax") in new stack
    -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/6002-08779d60", "0?chanfull") in new stack
    -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/6002-08779d60", "0?skipoutcid") in new stack
    -- Executing [s@macro-dialout-trunk:10] Set("SIP/6002-08779d60", "DIAL_TRUNK_OPTIONS=") in new stack
    -- Executing [s@macro-dialout-trunk:11] Macro("SIP/6002-08779d60", "outbound-callerid|2") in new stack
    -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/6002-08779d60", "0|SetCallerPres|") in new stack
    -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/6002-08779d60", "0|Set|REALCALLERIDNUM=6002") in new stack
    -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/6002-08779d60", "1?normcid") in new stack
    -- Goto (macro-outbound-callerid,s,6)
    -- Executing [s@macro-outbound-callerid:6] Set("SIP/6002-08779d60", "USEROUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:7] Set("SIP/6002-08779d60", "EMERGENCYCID=") in new stack
    -- Executing [s@macro-outbound-callerid:8] Set("SIP/6002-08779d60", "TRUNKOUTCID=") in new stack
    -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/6002-08779d60", "1?trunkcid") in new stack
    -- Goto (macro-outbound-callerid,s,12)
    -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/6002-08779d60", "0|Set|CALLERID(all)=") in new stack
    -- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/6002-08779d60", "1?exit") in new stack
    -- Goto (macro-outbound-callerid,s,11)
    -- Executing [s@macro-outbound-callerid:11] MacroExit("SIP/6002-08779d60", "") in new stack
    -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/6002-08779d60", "0|AGI|fixlocalprefix") in new stack
    -- Executing [s@macro-dialout-trunk:13] Set("SIP/6002-08779d60", "OUTNUM=150") in new stack
    -- Executing [s@macro-dialout-trunk:14] Set("SIP/6002-08779d60", "custom=DAHDI/g1") in new stack
    -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/6002-08779d60", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
    -- Executing [s@macro-dialout-trunk:16] Macro("SIP/6002-08779d60", "dialout-trunk-predial-hook|") in new stack
    -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/6002-08779d60", "") in new stack
    -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/6002-08779d60", "0?bypass|1") in new stack
    -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/6002-08779d60", "0?customtrunk") in new stack
    -- Executing [s@macro-dialout-trunk:19] Dial("SIP/6002-08779d60", "DAHDI/g1/150|300|") in new stack
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [s@macro-dialout-trunk:20] Goto("SIP/6002-08779d60", "s-CONGESTION|1") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,1)
    -- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/6002-08779d60", "1?noreport") in new stack
    -- Goto (macro-dialout-trunk,s-CONGESTION,3)
    -- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/6002-08779d60", "TRUNK Dial failed due to CONGESTION - failing through to other trunks") in new stack
    -- Executing [9150@from-internal:5] Macro("SIP/6002-08779d60", "outisbusy|") in new stack
    -- Executing [s@macro-outisbusy:1] Playback("SIP/6002-08779d60", "all-circuits-busy-now|noanswer") in new stack
    -- <SIP/6002-08779d60> Playing 'all-circuits-busy-now' (language 'en')
Really destroying SIP dialog 'ouuyyobytlxdtht@localhost' Method: ACK
    -- Executing [s@macro-outisbusy:2] Playback("SIP/6002-08779d60", "pls-try-call-later|noanswer") in new stack
    -- <SIP/6002-08779d60> Playing 'pls-try-call-later' (language 'en')
    -- Executing [s@macro-outisbusy:3] Macro("SIP/6002-08779d60", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/6002-08779d60", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/6002-08779d60", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/6002-08779d60", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/6002-08779d60", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/6002-08779d60", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SIP/6002-08779d60", "") in new stack
  == Spawn extension (from-internal, 9150, 5) exited non-zero on 'SIP/6002-08779d60'
    -- Executing [h@from-internal:1] Macro("SIP/6002-08779d60", "hangupcall") in new stack
    -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/6002-08779d60", "w") in new stack
    -- Executing [s@macro-hangupcall:2] NoCDR("SIP/6002-08779d60", "") in new stack
    -- Executing [s@macro-hangupcall:3] GotoIf("SIP/6002-08779d60", "1?skiprg") in new stack
    -- Goto (macro-hangupcall,s,6)
    -- Executing [s@macro-hangupcall:6] GotoIf("SIP/6002-08779d60", "1?skipblkvm") in new stack
    -- Goto (macro-hangupcall,s,9)
    -- Executing [s@macro-hangupcall:9] GotoIf("SIP/6002-08779d60", "1?theend") in new stack
    -- Goto (macro-hangupcall,s,11)
    -- Executing [s@macro-hangupcall:11] Hangup("SIP/6002-08779d60", "") in new stack
  == Spawn extension (from-internal, s, 1) exited non-zero on 'SIP/6002-08779d60'
 

echelon75

Joined
Dec 27, 2009
Messages
75
Likes
0
Points
0
#16
Hi,

I go exactly the same problem on Elastix serveur and for me it work now.
I follow your original conf files setup with one xlite extension to mak tests.
X-lite ------- elastix --------- T2/E1

In France number format to call a cellular is 06xxxxxxxx . From Xlite I simply try 906xxxxxxxx and got all circuit are busy...
If I call with xlite 96xxxxxxxx it's work I just removed the first digit 0 in my called phone number.


Regards

Richard
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,886
Members
17,564
Latest member
Mai Tuyen
Top