No http connection?

Discussion in 'General' started by bulgarion, Mar 21, 2008.

  1. bulgarion

    Joined:
    Feb 22, 2008
    Messages:
    38
    Likes Received:
    0
    Hi guys,
    I need support on this - I'm trying to install the 0.9.2 stable version for a customer, but it seems to not work out-of-the-box. I've completed several successful installation, the only thing different here is that I've installed the base system over a RAID ICH9R controller (I found on the manufacturer website the modules for CentOS 5, that allowed me to build the filesystem and so on). The system now loads up correctly (except for an "audit error" on postfix during startup), but I can't manage to have access to the http/https page. I tried:
    • Removing SELinux - seems to connect to http but not to redirect on the https page
    • Install a text browser like lynx and locally try to access to the web management on 127.0.0.1 - no success
    Any ideas? Thanks in advance!

    Marco
     
  2. bulgarion

    Joined:
    Feb 22, 2008
    Messages:
    38
    Likes Received:
    0
    hm - ok, I found out that the https port is not "listening", so it's obvious that I can't connect. But the port 80 is ok, so why should it not work out-of-the-box?! :blink:
     
  3. bulgarion

    Joined:
    Feb 22, 2008
    Messages:
    38
    Likes Received:
    0
  4. bulgarion

    Joined:
    Feb 22, 2008
    Messages:
    38
    Likes Received:
    0
    Solved with this. Now it's not showing the installed zaptel hardware, but that's another question...
     
  5. rejil.rajan

    Joined:
    Apr 8, 2007
    Messages:
    154
    Likes Received:
    0
    Hi

    What is the zaptel hardware your using. Trying giving the command /etc/init.d/zaptel restart or genzaptelconf. After giving both these commands have a look if the zaptel hardware is loaded using the zttool command
     

Share This Page