no Fax Handling in 1.5.2-2 after full update

Discussion in 'General' started by maumar, Apr 20, 2009.

  1. maumar

    Joined:
    Sep 12, 2008
    Messages:
    80
    Likes Received:
    0
    Sadly, in a fresh installed elastix 1.5.2-2, whan adding an extenson i cannot get:
    Fax Handling
    box, neither SIP, neither IAX2.
    What am i missing? should i have to enable something somewhere?
    tia

    Maurizio
     
  2. maumar

    Joined:
    Sep 12, 2008
    Messages:
    80
    Likes Received:
    0
    Re:no Fax Handling in 1.5.2-2

    I must correct: the system is not *freshly* installed, it was fully updated with yum as regards to packages, and by freepbx panel, all the modules where updated massively.
    Now, after a few days, I need to configure fax and I realize (sadly) fax configuration box is *desaparecido* by iax2 and sip extension configuration.
    I wonder if it is necessary to reinstall everithing to get it back.
    Luckly, this is not a production system.

    Maurizio [​IMG]
     
  3. ramoncio

    Joined:
    May 12, 2010
    Messages:
    1,663
    Likes Received:
    0
    Re:no Fax Handling in 1.5.2-2

    The fax handling is configured in the Inbound routes tab, not in the Extensions tab.
    You can also install NVFaxdetect for improved fax detection. Look in the forums, I put a small script somewhere.
     
  4. maumar

    Joined:
    Sep 12, 2008
    Messages:
    80
    Likes Received:
    0
  5. maumar

    Joined:
    Sep 12, 2008
    Messages:
    80
    Likes Received:
    0
    Re:no Fax Handling in 1.5.2-2

    this is elastix 1.3, with freepbx never updated, clicking on new sip extension: [​IMG]
     
  6. maumar

    Joined:
    Sep 12, 2008
    Messages:
    80
    Likes Received:
    0
    Re:no Fax Handling in 1.5.2-2

    I always wonder why this box was into extension and into inbound route :)
    it is a duplicate
    So, having it into *inbound routes* only, is an enhancement; the only thing I suggest is to update wiki.
    In the wiki nothing is said about inbound route; instead, after creating iax2 extension, you should configure it.
    If Mazurek does not update it, I or someone other could help.
     
  7. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    Re:no Fax Handling in 1.5.2-2

    one question, after your update, when you click on an existant extension, do you get the info that it should have, or all the info is in blank? If so, what warnings, do you have on unembedded freepbx?
     

Share This Page