No consigo linea externa con Openvox B200P

Xenon

Joined
Feb 24, 2010
Messages
2
Likes
0
Points
0
#1
Hola a tod@s, un novato mas que se añade a la comunidad Elastix, tras un tiempo queriendo montar Elastix, me he decidido por una Openvox B200P, pero no logro que coga linia externa para marcar a numeros nacionales o moviles.
Para la configuracion he probado estos pasos.

http://www.azulcom.com/guiab200p.pdf
http://downloads.openvox.cn/pub/misc/How to install elastix-1.6 with OpenVox B200P mISDN.pdf
http://www.elastix.org/index.php?option=com_fireboard&Itemid=55&id=4887&catid=11&func=fb_pdf

La tarjeta parace estar detectada por Elastix, ya que el led rojo parpadea y cuando le conecto el cable de linea se queja ilumidado, pero al marcar me sale la locucion de Asterisk indicando que las lineas estan ocupadas, solo en una ocasion tras instalar segun el primer link y ver que no funcionaba instale como indica el segundo link (sin reiniciar el servidor), logre que cogiera linea externa, pero el operador me indicaba que el numero marcado era incorrecto, por lo que modifique el fichero misdn.conf el valor de "nationalprefix=0" a "nationalprefix= " pero entonces me volvio a salir la locucion de asterisk de linea ocupadas y aun volviendo a dejar el valor a 0 no he logrado que me vuelva a coger linea externa.

Ahora estoy con la lectura de Elastix without tears, Elastix comunicaciones Unificadas Vol.1 y vol.2, pero una pista me vendria muy bien ;)

Gracias.
 

jcastellanos

Joined
Feb 10, 2009
Messages
2,404
Likes
0
Points
0
#2
en si yo creo que estas dando de alta mal tus troncales, com lo tienes configurado? puedes pegar algunas caps o algo asi?
 

Xenon

Joined
Feb 24, 2010
Messages
2
Likes
0
Points
0
#3
Hola de nuevo, pongo una capturas para ver si me iluminan ;)

Fichero misdn.conf - aqui añadi el contexto [rdsi]

;
; defines the maximum amount of outgoing calls per port for this group
; exceeding calls will be rejected
;
max_outgoing=-1

[rdsi]
ports=1,2
context=from-pstn
echocancel=yes
msns=*


[intern]
; define your ports, e.g. 1,2 (depends on mISDN-driver loading order)
ports=1,2
; context where to go to when incoming Call on one of the above ports
context=Intern

[internPP]
;
; adding the postfix 'ptp' to a port number is obsolete now, chan_misdn
; parses /etc/misdn-init.conf and sets the ptp mode to the corresponding
; configs. For backwards compatibility you can still set ptp here.
;
ports=3

[first_extern]
; again port defs
ports=4
; again a context for incoming calls
context=Extern1
; msns for te ports, listen on those numbers on the above ports, and
; indicate the incoming calls to asterisk
; here you can give a comma separated list or simply an '*' for
; any msn.
msns=*

; here an example with given msns
[second_extern]
ports=5
context=Extern2
callerid=15
msns=102,144,101,104



RESULTADO DEL COMANDO MSIDN SHOW STACKS
elastix*CLI> misdn show stacks
BEGIN STACK_LIST:
* Port 1 Type TE Prot. PMP L2Link DOWN L1Link:UP Blocked:0 Debug:0
* Port 2 Type TE Prot. PMP L2Link DOWN L1Link:dOWN Blocked:0 Debug:

RESULTADO DEL COMANDO MSIDN SHOW CONFIG
elastix*CLI> misdn show config
Misdn General-Config:
-> misdn_init: /etc/misdn-init.conf -> debug: 0
-> tracefile: /var/log/asterisk/misdn.log -> bridging: no
-> stop_tone_after_first_digit: yes -> append_digits2exten: yes
-> dynamic_crypt: no -> crypt_prefix: **
-> crypt_keys: test,muh -> ntkeepcalls: no
-> ntdebugflags: 0 -> ntdebugfile: /var/log/misdn-nt.log


[PORT 1]
-> name: intern -> allowed_bearers: all
-> far_alerting: no -> rxgain: 0
-> txgain: 0 -> te_choose_channel: no
-> pmp_l1_check: no -> reject_cause: 16
-> block_on_alarm: no -> hdlc: no
-> context: Intern -> language: es
-> musicclass: default -> callerid:
-> method: standard -> dialplan: 0
-> localdialplan: 0 -> cpndialplan: 0
-> nationalprefix: 0 -> internationalprefix: 00
-> presentation: -1 -> screen: -1
-> always_immediate: no -> nodialtone: no
-> immediate: no -> senddtmf: yes
-> astdtmf: no -> hold_allowed: no
-> early_bconnect: yes -> incoming_early_audio: no
-> echocancel: 0 -> need_more_infos: no
-> noautorespond_on_setup: no -> nttimeout: no
-> bridging: yes -> jitterbuffer: 4000
-> jitterbuffer_upper_threshold: 0 -> callgroup:
-> pickupgroup: -> max_incoming: -1
-> max_outgoing: -1 -> l1watcher_timeout: 0
-> overlapdial: 4 -> msns: *
-> faxdetect: no -> faxdetect_context:
-> faxdetect_timeout: 5 -> ptp: no


[PORT 2]
-> name: intern -> allowed_bearers: all
-> far_alerting: no -> rxgain: 0
-> txgain: 0 -> te_choose_channel: no
-> pmp_l1_check: no -> reject_cause: 16
-> block_on_alarm: no -> hdlc: no
-> context: Intern -> language: es
-> musicclass: default -> callerid:
-> method: standard -> dialplan: 0
-> localdialplan: 0 -> cpndialplan: 0
-> nationalprefix: 0 -> internationalprefix: 00
-> presentation: -1 -> screen: -1
-> always_immediate: no -> nodialtone: no
-> immediate: no -> senddtmf: yes
-> astdtmf: no -> hold_allowed: no
-> early_bconnect: yes -> incoming_early_audio: no
-> echocancel: 0 -> need_more_infos: no
-> noautorespond_on_setup: no -> nttimeout: no
-> bridging: yes -> jitterbuffer: 4000
-> jitterbuffer_upper_threshold: 0 -> callgroup:
-> pickupgroup: -> max_incoming: -1
-> max_outgoing: -1 -> l1watcher_timeout: 0
-> overlapdial: 4 -> msns: *
-> faxdetect: no -> faxdetect_context:
-> faxdetect_timeout: 5 -> ptp: no
 

Members online

No members online now.

Latest posts

Forum statistics

Threads
30,902
Messages
130,886
Members
17,564
Latest member
Mai Tuyen
Top