No carrier detect

Discussion in 'General' started by mazok2, Aug 30, 2010.

  1. mazok2

    Joined:
    Jul 4, 2010
    Messages:
    8
    Likes Received:
    0
    hi,

    my name's armel, and i have some problems to send a fax from my elastix server

    my iaxmodem-cfg.ttyIAX1 :

    device /dev/ttyIAX1
    owner uucp:uucp
    mode 660
    port 4579
    refresh 300
    server 192.168.2.100
    peername 2000
    secret sslink
    cidname SSLINK_CI
    cidnumber 22495344
    codec alaw
    ModemDialCmd: ATDT%s



    please Help me.
     
  2. dingoland

    Joined:
    Jan 16, 2008
    Messages:
    220
    Likes Received:
    0
    Hi Armel,

    Which software do you use to send faxes through Elastix ?
    Winprint hylafax, avantfax, Yajhfc ?
    You have to add the ip of the computer where you send fax in the fax clients tab.

    Else for the carrier problem, do you have your iax modem ready on ttyiax1 ?
    Do you need to compose a 0 or 9 to call outside ?

    Regards
     
  3. mazok2

    Joined:
    Jul 4, 2010
    Messages:
    8
    Likes Received:
    0
    Hi,

    i used Yajhfc to send fax . yes i added the ip adress of the computer where you send fax in the fax clients tab. yes my iaxmodem is ready. We compose (2) to call outside. For example , (2 + 00225+ faxnumber) ; please propose me an dialplan and outbound route + a trunk . please. i need your help

    Best regards
     
  4. andyshawn

    Joined:
    Apr 3, 2009
    Messages:
    113
    Likes Received:
    0
    What version of elastix are you running? Have you tried using another fax client like winprint hylafax to send?
     
  5. dingoland

    Joined:
    Jan 16, 2008
    Messages:
    220
    Likes Received:
    0
    Hi,

    You compose international number format to send faxes.
    Do you tried with only the 2 + fax number only ?
    Does audio calls going out correctly ?

    Regards
     

Share This Page