multiple groups on on single span pri card

Discussion in 'General' started by abhasbajpai, Jul 3, 2009.

  1. abhasbajpai

    Joined:
    Nov 12, 2008
    Messages:
    7
    Likes Received:
    0
    Hi,
    I am using Elastix 1.3 with te122 E1 card in India.
    I want to reserve for 4 channels for extension on zap, say g1 and route all call through g1 freeing the g0 with 24 channels. it should be like
    g0 24 channels
    g1 4 channels

    my zaptel.conf

    # Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
    # Zaptel Configuration File
    #
    # This file is parsed by the Zaptel Configurator, ztcfg
    #

    # It must be in the module loading order


    # Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4
    span=1,1,0,ccs,hdb3,crc4
    # termtype: te
    bchan=1-15,17-31
    dchan=16

    # Global data

    loadzone = us
    defaultzone = us

    my zapata.conf

    [trunkgroups]

    [channels]
    context=from-pstn
    signalling=fxs_ks
    rxwink=300 ; Atlas seems to use long (250ms) winks
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    canpark=yes
    cancallforward=yes
    callreturn=yes
    echocancel=no
    echocancelwhenbridged=no
    faxdetect=none
    echotraining=800
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1

    ;Uncomment these lines if you have problems with the disconection of your analog lines
    ;busydetect=yes
    ;busycount=3


    immediate=no

    #include zapata_additional.conf
    #include zapata-channels.conf

    zapata-channels.conf

    ; Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
    ; Zaptel Channels Configurations (zapata.conf)
    ;
    ; This is not intended to be a complete zapata.conf. Rather, it is intended
    ; to be #include-d by /etc/zapata.conf that will include the global settings
    ;

    ; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4
    group=0,11
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 1-15,17-31
    group=
    context=default


    Please guide me how to achieve this
     
  2. dicko

    Joined:
    Oct 24, 2008
    Messages:
    4,099
    Likes Received:
    0
    Just edit :
    .
    .
    ; Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS/CRC4
    group=0
    context=from-pstn
    switchtype = euroisdn
    signalling = pri_cpe
    channel => 1-15,17-25
    group=1
    channel => 26-31
    .
    .

    (just choose the division as you care)

    Be aware that your provider will not normally honor this division for incoming, it will just limit your outbound call concurrency.
     

Share This Page