I have a PBX running 6 POTS lines. I set up a SIP Trunk. My SIP Inbound Route points to an extension that is a member of a Queue that is the Destination of the any/all POTS Inbound. So I have two Inbound Routes pointing to the same Extension. When I call in on the SIP Inbound, the phone rings, but I hear no voice. How do I set this up? Here are the last 3 lines of the incoming call on my SIP Inbound to the Extension in question: [Feb 21 15:48:02] VERBOSE logger.c: -- SIP/5004-08e294c8 is ringing [Feb 21 15:48:08] VERBOSE logger.c: -- SIP/5004-08e294c8 answered SIP/sip-b68101f0 [Feb 21 15:48:10] VERBOSE logger.c: -- Starting simple switch on 'DAHDI/1-1' Calls out of the Extension go out G0 properly, and call into the POTS Queue are fine. Thanks.