Mas perdido que el barco del arroz XD

Joined
Mar 3, 2009
Messages
11
Points
0
Hola a todos. Estoy entusiasmado con el tema voip y ayer se me ocurrió empezar a hacerme instalaciones del asterix y elastix.

Como digo en el membrete ando muy perdido xD

a ver si soy capaz de explicarme:

Tengo creada una extension:

Miguel <6000>
Extension: 6000

Tengo creada una ruta saliente:

Con este patron de llamadas: 9|.
Entiendo que debo usar el 9 para poder usar esta ruta saliente. Esta ruta tiene asignado un troncal.

Tengo un troncal:
En el troncal tengo configurado mi host, usuario, contraseña.

Además de todo ésto tengo un X-lite como terminal SIP, se supone que si marco:

9 Numero de telefono internacional . Ej: 900349xxxxxxxx

¿No deberia salir la llamada por el troncal de mi proveedor voip?

Un saludo

Y gracias de antemano
 
Joined
May 12, 2010
Messages
1,663
Points
0
La extensión 6000 tienes que configurarla en el x-lite y los datos del proveedor sip en la troncal.
Leete Elastix without tears para empezar.
Desde la consola de asterisk deberías poder ver con
# sip show peers
si la extensión y la trocal están correctamente registradas.
 
Joined
Mar 3, 2009
Messages
11
Points
0
Hola Ramoncio,

Gracias por la ayuda, he estado leyendo el manual y algo he conseguido.

Tengo 3 extensiones SIP, 2 de ellas conectadas con softphones y ya puedo llamarme de una a la otra.

Lo que no me funciona es el Troncal, lo tengo puesto solo para salida con el host, user, password, type=peer , cuando voy a la freepbx y voy al system status, no me aparace el troncal como registrado.

¿Que habria que poner en los patrones de marcados de las rutas salientes y el unico troncal que tengo para que todas las llamadas salgan por ese troncal?

Dejarlos en blanco?
 
Joined
May 12, 2010
Messages
1,663
Points
0
¿Que proveedor tienes y como has configurado la troncal?
Pon la configuracion del peer que has puesto en freePBX.
¿Has probado configurar la cuenta de tu proveedor de voip directamente en el x-lite y has podido sacar llamadas?
Eso es lo primero que deberías intentar.
 
Joined
Mar 3, 2009
Messages
11
Points
0
Ramoncio, el tema es que tengo varias configuraciones ahora mismo funcionando con el asterix.

La de Elastix me da error para actualizar los modulos del freepbx (no encuentra el servidor)

En la otra version que tengo funcionando la freepbx es mas moderna y si me funciona el troncal con la misma informacion que le tengo puesto a la de elastix.

Host=sip.justvoip.com
Username=XXXX
Secret=xxxx
type=peer

He puesto como patron de llamadas 0|. en la ruta saliente y sin patron en el troncal. Ahora ya no me rechaza la llamada rapidamente, intenta conectarse pero al rato me dice que el interlocutor esta ocupado. He comprobado y tengo el troncal registrado y la extension tambien.

Creo que el hecho de que no me registre el troncal en el elastix es porque no me deja actualizar los modulos, porque en el asterixnow con freepbx 2.5.1.1 si me funciona con la misma informacion.
 
Joined
May 12, 2010
Messages
1,663
Points
0
Ojo.
Justvoip sólo te permite registrar una cuenta desde cada ip. Sólo permiten una línea y una llamada simultáneas.
Si apagas el otro ordenador con freepbx seguramente el trunk del elastix se registre.
 
Joined
Mar 3, 2009
Messages
11
Points
0
Bueno, tenia solo abierto elastix y no registraba, he abierto la asterixnow y si me registra, aunque creo que el problema debe ser lo de la actualizacion de paquetes.

¿Porque no se actualizará? hay algun bug conocido?

En cualquier caso no se porque intenta hacer la llamada pero al final la rechaza, algo debo hacer mal. Seguiré probando xD
 
Joined
May 12, 2010
Messages
1,663
Points
0
Un consejo.
Siempre que pidas ayuda pega los logs de la consola de asterisk durante la llamada con el debug activado y el verbose al máximo:

sip set debug 99
sip set verbose 99


Así se puede ver lo que realmente pasa.
 
Joined
May 12, 2010
Messages
1,663
Points
0
Lo de la actualización de módulos supongo que será temporal. Inténtalo mañana otra vez a ver si funciona.
 
Joined
Mar 3, 2009
Messages
11
Points
0
Gracias de nuevo Ramoncio.

Me recomiendas algun proveedor para usar con Elastix que sea economico a moviles españoles y admita varias llamadas simultaneas?
 
Joined
May 12, 2010
Messages
1,663
Points
0
Estoy buscando lo mismo.
Hasta ahora usaba justvoip, pero ahora quiero poder llamar a 2 móviles a la vez.
He probado con calleasy.com y ha sido un robo. Ni se te ocurra.
En su tarifa pone 0,04
 
Joined
Mar 3, 2009
Messages
11
Points
0
Tenia esa de calleasy.com ya a la vista, pero lei un post tuyo esta tarde sobre el tema, vaya plan.

Hay una que no tiene mala pinta es www.smartvoip.com a 0,05 sin impuestos y tambien es de Betamax, lo que no se si permitirá hacer varias llamadas simultaneas.

Un saludo
 
Joined
Mar 3, 2009
Messages
11
Points
0
He vuelto a probar y me sigue dando linea ocupada. Supongo que algo estará mal configurado.

Marco el 0 para coger el troncal de Justvoip y luego el numero en formato internacional.

El log:

[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [00034600800109@from-internal:1] Macro("SIP/3000-086e5dd8", "user-callerid|SKIPTTL|") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:1] Set("SIP/3000-086e5dd8", "AMPUSER=3000") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/3000-086e5dd8", "0?report") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/3000-086e5dd8", "1|Set|REALCALLERIDNUM=3000") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:4] Set("SIP/3000-086e5dd8", "AMPUSER=3000") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:5] Set("SIP/3000-086e5dd8", "AMPUSERCIDNAME=Administracion") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/3000-086e5dd8", "0?report") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:7] Set("SIP/3000-086e5dd8", "AMPUSERCID=3000") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:8] Set("SIP/3000-086e5dd8", "CALLERID(all)="Administracion" <3000>") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:9] Set("SIP/3000-086e5dd8", "REALCALLERIDNUM=3000") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/3000-086e5dd8", "0|Set|CHANNEL(language)=") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/3000-086e5dd8", "1?continue") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Goto (macro-user-callerid,s,20)
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-user-callerid:20] NoOp("SIP/3000-086e5dd8", "Using CallerID "Administracion" <3000>") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Noop
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [00034600800109@from-internal:2] Set("SIP/3000-086e5dd8", "_NODEST=") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [00034600800109@from-internal:3] Macro("SIP/3000-086e5dd8", "record-enable|3000|OUT|") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/3000-086e5dd8", "1?check") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Goto (macro-record-enable,s,4)
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-record-enable:4] AGI("SIP/3000-086e5dd8", "recordingcheck|20090304-001346|1236122026.42") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck
[Mar 4 00:13:46] VERBOSE[4567] logger.c: recordingcheck|20090304-001346|1236122026.42: Outbound recording not enabled
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- AGI Script recordingcheck completed, returning 0
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: AGI
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-record-enable:5] MacroExit("SIP/3000-086e5dd8", "") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [00034600800109@from-internal:4] Macro("SIP/3000-086e5dd8", "dialout-trunk|2|0034600800109||") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/3000-086e5dd8", "DIAL_TRUNK=2") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] DEBUG[4567] func_db.c: DB: AMPUSER/3000/pinless not found in database.
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/3000-086e5dd8", "0?sub-pincheck|s|1") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GosubIf
[Mar 4 00:13:46] DEBUG[4567] func_db.c: DB: AMPUSER/3000/pinless not found in database.
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/3000-086e5dd8", "0?disabletrunk|1") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/3000-086e5dd8", "DIAL_NUMBER=0034600800109") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/3000-086e5dd8", "DIAL_TRUNK_OPTIONS=tr") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/3000-086e5dd8", "OUTBOUND_GROUP=OUT_2") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/3000-086e5dd8", "0?nomax") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:8] GotoIf("SIP/3000-086e5dd8", "0?chanfull") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/3000-086e5dd8", "0?skipoutcid") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/3000-086e5dd8", "DIAL_TRUNK_OPTIONS=") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/3000-086e5dd8", "outbound-callerid|2") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/3000-086e5dd8", "0|SetCallerPres|") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/3000-086e5dd8", "0|Set|REALCALLERIDNUM=3000") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/3000-086e5dd8", "1?normcid") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Goto (macro-outbound-callerid,s,6)
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/3000-086e5dd8", "USEROUTCID=") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] DEBUG[4567] func_db.c: DB: DEVICE/3000/emergency_cid not found in database.
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/3000-086e5dd8", "EMERGENCYCID=") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/3000-086e5dd8", "TRUNKOUTCID=") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/3000-086e5dd8", "1?trunkcid") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Goto (macro-outbound-callerid,s,12)
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/3000-086e5dd8", "0|Set|CALLERID(all)=") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:13] GotoIf("SIP/3000-086e5dd8", "1?exit") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Goto (macro-outbound-callerid,s,11)
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-outbound-callerid:11] MacroExit("SIP/3000-086e5dd8", "") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Macro
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/3000-086e5dd8", "0|AGI|fixlocalprefix") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/3000-086e5dd8", "OUTNUM=0034600800109") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/3000-086e5dd8", "custom=SIP/Justvoip") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Set
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/3000-086e5dd8", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: ExecIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/3000-086e5dd8", "dialout-trunk-predial-hook|") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/3000-086e5dd8", "") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: Macro
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/3000-086e5dd8", "0?bypass|1") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/3000-086e5dd8", "0?customtrunk") in new stack
[Mar 4 00:13:46] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/3000-086e5dd8", "SIP/Justvoip/0034600800109|300|") in new stack
[Mar 4 00:13:46] VERBOSE[4567] logger.c: -- Called Justvoip/0034600800109
[Mar 4 00:14:18] NOTICE[3478] chan_sip.c: Auto-congesting SIP/Justvoip-086c5ac8
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- SIP/Justvoip-086c5ac8 is circuit-busy
[Mar 4 00:14:18] VERBOSE[4567] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
[Mar 4 00:14:18] DEBUG[4567] app_macro.c: Executed application: Dial
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Executing [s@macro-dialout-trunk:20] Goto("SIP/3000-086e5dd8", "s-CONGESTION|1") in new stack
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Goto (macro-dialout-trunk,s-CONGESTION,1)
[Mar 4 00:14:18] DEBUG[4567] app_macro.c: Executed application: Goto
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Executing [s-CONGESTION@macro-dialout-trunk:1] GotoIf("SIP/3000-086e5dd8", "1?noreport") in new stack
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Goto (macro-dialout-trunk,s-CONGESTION,3)
[Mar 4 00:14:18] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Executing [s-CONGESTION@macro-dialout-trunk:3] NoOp("SIP/3000-086e5dd8", "TRUNK Dial failed due to CONGESTION - failing through to other trunks") in new stack
[Mar 4 00:14:18] DEBUG[4567] app_macro.c: Executed application: Noop
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Executing [00034600800109@from-internal:5] Macro("SIP/3000-086e5dd8", "outisbusy|") in new stack
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- Executing [s@macro-outisbusy:1] Playback("SIP/3000-086e5dd8", "all-circuits-busy-now|noanswer") in new stack
[Mar 4 00:14:18] VERBOSE[4567] logger.c: -- <SIP/3000-086e5dd8> Playing 'all-circuits-busy-now' (language 'en')
[Mar 4 00:14:20] VERBOSE[4567] logger.c: == Spawn extension (macro-outisbusy, s, 1) exited non-zero on 'SIP/3000-086e5dd8' in macro 'outisbusy'
[Mar 4 00:14:20] VERBOSE[4567] logger.c: == Spawn extension (from-internal, 00034600800109, 5) exited non-zero on 'SIP/3000-086e5dd8'
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [h@from-internal:1] Macro("SIP/3000-086e5dd8", "hangupcall") in new stack
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/3000-086e5dd8", "w") in new stack
[Mar 4 00:14:20] DEBUG[4567] app_macro.c: Executed application: ResetCDR
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("SIP/3000-086e5dd8", "") in new stack
[Mar 4 00:14:20] DEBUG[4567] app_macro.c: Executed application: NoCDR
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("SIP/3000-086e5dd8", "1?skiprg") in new stack
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Goto (macro-hangupcall,s,6)
[Mar 4 00:14:20] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("SIP/3000-086e5dd8", "1?skipblkvm") in new stack
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Goto (macro-hangupcall,s,9)
[Mar 4 00:14:20] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("SIP/3000-086e5dd8", "1?theend") in new stack
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Goto (macro-hangupcall,s,11)
[Mar 4 00:14:20] DEBUG[4567] app_macro.c: Executed application: GotoIf
[Mar 4 00:14:20] VERBOSE[4567] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("SIP/3000-086e5dd8", "") in new stack
[Mar 4 00:14:20] VERBOSE[4567] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/3000-086e5dd8' in macro 'hangupcall'
[Mar 4 00:14:20] VERBOSE[4567] logger.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/3000-086e5dd8'
[Mar 4 00:14:23] VERBOSE[4570] logger.c: == Parsing '/etc/asterisk/manager.conf': [Mar 4 00:14:23] VERBOSE[4570] logger.c: Found
[Mar 4 00:14:23] VERBOSE[4570] logger.c: == Parsing '/etc/asterisk/manager_additional.conf': [Mar 4 00:14:23] VERBOSE[4570] logger.c: Found
[Mar 4 00:14:23] VERBOSE[4570] logger.c: == Parsing '/etc/asterisk/manager_custom.conf': [Mar 4 00:14:23] VERBOSE[4570] logger.c: Found
[Mar 4 00:14:23] VERBOSE[4570] logger.c: == Manager 'admin' logged on from 127.0.0.1
 
Joined
May 12, 2010
Messages
1,663
Points
0
Pega una traza sip de la llamada.

Desde la consola de linux ejecuta:

ngrep -d any -P ' ' -W byline -T port 5060 >> trazasip.txt

Y cuando acabes la llamada sales con CTRL+C

Adjunta con el post el archivo trazasip.txt
 
Joined
Mar 3, 2009
Messages
11
Points
0
Bien, ya lo hice todo, ahora el tema es como saco el archivo trazasip.txt del linux :laugh:

Uso VMWare y ni idea de los comandos de linux, hay alguna forma de enviarlo por email o algo asi desde linea de comandos?
 
Joined
Mar 3, 2009
Messages
11
Points
0
Ramoncio,

He encontrado un proveedor SIP/H323 interesante:

www.Siptraffic.com


Tiene 3 Rutas posibles (Bronce, Plata y Oro)

Con la misma cuenta puedes usar cualquiera de ellas, todo depende de lo que quieras, si calidad o precio.

Con la misma cuenta puedes hacer todas las llamadas simultaneas que quieras.

He puesto un apply a ver si empiezo a usarlo.

Un saludo
 

Members online

No members online now.

Forum statistics

Threads
30,992
Messages
131,106
Members
17,716
Latest member
Orbit114
Top