Llamadas Salientes

Discussion in 'Elastix 2.x' started by jcastellanos, Feb 25, 2009.

  1. jcastellanos

    Joined:
    Feb 10, 2009
    Messages:
    2,404
    Likes Received:
    0
    Hola a todos...

    hoy tengo un problema, tengo dos troncales, Zap 01 y Zap 02, y tengo 2 extenciones 100 y 200, lo que quiero hacer que que la extencion 100 solo saque llamadas del Zap 01 y la extencion 200 solo saque las llamadas del Zap 02.

    yo se que poniendo parametros funciona, osea en el dial poner 001|x. y en Zap 2 poner 002|x., pero me quiero evitar poner eses prefijos, ya que si de la extencion 100 se digita 002|x. la llamada saldra por ese canal, lo cual es lo que no quiero, hay manera de hacerlo???

    gracias
     
  2. jgutierrez

    Joined:
    Feb 28, 2008
    Messages:
    5,737
    Likes Received:
    0
    Se me ocurre lo siguiente:

    1. En la interfaz web define dos rutas salientes, donde la primera sólo utiliza el zap1 y la segunda el zap2

    2. Ingresa al siguiente archivo: extensions_additional.conf

    3. Busca la siguiente sección:
    [outbound-allroutes]
    include => outbound-allroutes-custom
    include => outrt-001-linea1
    include => outrt-002-linea2

    donde linea1 es el nombre que le pusiste a la primera ruta saliente (outrt-001- lo agrega freepbx)
    donde linea2 es el nombre que le pusiste a la segunda ruta saliente (outrt-002- lo agrega freepbx)

    4. En extensions_custom.conf define los siguientes contextos:
    Code:
    [interno]
    include => ext-meetme
    include => app-callwaiting-cwoff
    include => app-callwaiting-cwon
    include => app-dnd-off
    include => app-dnd-on
    include => app-dictate-record
    include => app-dictate-send
    include => ext-queues
    include => app-recordings
    include => app-dialvm
    include => app-vmmain
    include => app-speeddial
    include => app-calltrace
    include => app-directory
    include => app-echo-test
    include => app-speakextennum
    include => app-speakingclock
    include => ext-group
    include => grps
    include => app-pbdirectory
    include => ext-findmefollow
    include => fmgrps
    include => app-cf-busy-off
    include => app-cf-busy-off-any
    include => app-cf-busy-on
    include => app-cf-off
    include => app-cf-off-any
    include => app-cf-on
    include => app-cf-unavailable-off
    include => app-cf-unavailable-on
    include => app-userlogonoff
    include => app-pickup
    include => app-zapbarge
    include => app-chanspy
    include => ext-test
    include => ext-local
    include => park-dial
    include => parkedcalls
    exten => h,1,Hangup
    
    [linea1]
    include => interno
    include => outrt-001-linea1
    
    [linea2]
    include => interno
    include => outrt-002-linea2
    
    5. Edita tu extensión 100 desde la interfaz web, y en el campo que dice context, le borras el from-internal y le pones linea1

    6. Edita tu extensión 200 desde la interfaz web, y en el campo que dice context, le borras el from-internal y le pones linea2
     
  3. jcastellanos

    Joined:
    Feb 10, 2009
    Messages:
    2,404
    Likes Received:
    0
    correcto, una solucion muy rapida, y facil, pero GENIAL, ¡¡Gracias!!, ha quedado hasta ahora sin problemas.
     
  4. nightduke

    Joined:
    Apr 25, 2009
    Messages:
    235
    Likes Received:
    0
    De nuevo gracias
     

Share This Page